Yamaha RX-V779 Owner's Manual Page 102

  • Download
  • Add to my manuals
  • Print
  • Page
    / 149
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 101
En 102
Setup menu items
Menu Item Function Page
Speaker
Auto Setup Automatically optimizes the speaker settings (YPAO). 36
Manual Setup
Power Amp Assign Selects a speaker system. 104
Configuration
Front Selects the size of the front speakers. 104
Center Selects whether or not a center speaker is connected and its size. 104
Surround Selects whether or not surround speakers are connected and their size. 104
Surround Back Selects whether or not surround back speakers are connected and their size. 105
Front Presence Selects whether or not presence speakers are connected. 105
Subwoofer Selects whether or not a subwoofer is connected and its phase. 105
Layout Selects a surround speaker layout when surround speakers are used. 105
Bass Cross Over Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”. 105
Distance Sets the distance between each speaker and listening position. 106
Level Adjusts the volume of each speaker. 106
Parametric EQ Adjusts the tone with an equalizer. 106
Test Tone Enables/disables the test tone output. 107
Sound
Lipsync
Delay Enable Enables/disables the Lipsync adjustment for each input source. 107
Auto/Manual Select Selects the method to adjust the delay between video and audio output. 107
Adjustment Adjusts the delay between video and audio output manually. 108
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 108
Max Volume Sets the maximum volume to prevent excessive loudness. 108
Initial Volume Sets the initial volume for when this receiver is turned on. 108
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP effect level when the volume is adjusted. 108
CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D. 108
Virtual Surround Back Speaker Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. 108
Video Video Mode Enables/disables the video signal processing (resolution and aspect ratio). 109
HDMI
HDMI Control Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input). 110
Audio Output Selects a device to output audio. 111
Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 111
Page view 101
1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 148 149

Comments to this Manuals

No comments