Yamaha RX-V771 Manual download pdf (Page 96)

En 96

■ Network Standby

Selects whether to turn on this unit by the command from other network devices

(network standby).

Settings

■ MAC Address Filter

Sets the MAC address filter to limit access to this unit from other network devices.

❑ Mode

Enables/disables the MAC address filter.

Settings

❑ Address Setup

Specifies the MAC addresses (up to 10) of the network devices that will be permitted

access to this unit when “Mode” is set to “On”.

Multi Zone

Configures the multi zone settings.

■ Zone2 Set

Configures the audio output settings for Zone2.

• The “Zone2 Set” settings are available only when “Power Amp Assign” (p.89) is set to “7ch+1ZONE”

❑ Max Volume

Sets the Zone2 maximum volume so that sound is not too loud.

Setting range

-30.0dB ~ +15.0dB (5.0dB steps), +16.5dB

Default

+16.5dB

❑ Initial Volume

Sets the Zone2 initial volume for when this unit is turned on.

Settings

Off (default) Disables the network standby function.

Enables the network standby function.

(This unit consumes approximately 5 W of power.)

Off (default) Disables the MAC address filter.

Enables the MAC address filter. In “Address Setup”, specify the MAC

addresses of the network devices that will be permitted access to this

unit.

Off (default) Sets at the level when this unit last entered standby mode.

Sets at Mute, or -80.0dB ~ +16.5dB (0.5dB steps).

(This setting works only when “Max Volume” is set higher.)

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 127 128

No comments

Yamaha RX-V771 Manual Page 96