Yamaha RX-V771 Manual Page 91

  • Download
  • Add to my manuals
  • Print
  • Page
    / 128
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 90
En 91
Level
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front
Presence L, Front Presence R, Subwoofer
Setting range
-10.0dB ~ +10.0dB (0.5dB steps)
Default
0.0dB
Parametric EQ
Adjusts sound quality of tone with an equalizer.
PEQ Select
Selects a type of equalizer to be used.
Settings
“YPAO:Flat”, “YPAO:Front” and “YPAO:Natural” are available only when the measurement results of “Auto
Setup” have already been saved (p.35).
PEQ Data Copy
Copies the parametric equalizer values acquired with “Auto Setup” (p.35) to the
“Manual” fields for fine adjustment.
Choices
Manual equalizer adjustment
1
Set “PEQ Select” to “Manual” and press ENTER.
2
Use the cursor keys to select a speaker and press ENTER.
3
Use the cursor keys to select an item and press ENTER.
Band / Gain:
You can select a center frequency from the preset 7 bands and adjust the gain.
Freq. / Gain: You can adjust the center frequency of the selected band and adjust the gain.
Q / Gain: You can adjust the Q factor (bandwidth) of the selected band and adjust the gain.
Clear: Restores the default settings for the selected speaker.
4
Use the cursor keys to adjust parameters and press ENTER.
Setting range
Gain: -20.0dB ~ +6.0dB (0.5dB steps)
Center frequency: 31.3Hz ~ 16.0kHz
Q factor: 0.500 ~ 10.08
5
To exit from the menu, press ON SCREEN.
Test Tone
Enables/disabled the test tone output. Test tone output helps you to adjust the speaker
balance or equalizer while confirming its effect.
Settings
Manual
Select this when you want to adjust the equalizer manually.
For details, see “Manual equalizer adjustment”.
YPAO:Flat Adjusts individual speakers to achieve the same characteristics.
YPAO:Front
Adjusts individual speakers to achieve the characteristics same as the
front speakers.
YPAO:Natural Adjusts all speakers to achieve a natural sound.
Through Does not use the equalizer.
Flat > Manual Copies the “Flat” values acquired with “Auto Setup”.
Front > Manual Copies the “Front” values acquired with “Auto Setup”.
Natural > Manual Copies the “Natural” values acquired with “Auto Setup”.
Off (default) Does not output test tones.
On
Outputs test tones automatically when you adjust the speaker balance,
equalizer, etc.
Page view 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 127 128

Comments to this Manuals

No comments