Yamaha RX-V463 Manual Page 78
- Page / 273
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
76 En
Troubleshooting
After AUTO SETUP
• If the “ERROR” or “WARNING” screens appears, check the cause of the problem, then run “AUTO SETUP” again.
• If a warning message “W-1”, “W-2”, or “W-3” appears, corrections are made, but they may not be optimal.
• If an error message “E-9” occurs repeatedly, please contact a qualified Yamaha service center.
Warning message Cause Remedy
See
page
W-1:OUT OF PHASE
Speaker polarity is not correct. This
message may appear depending on the
speakers even when the speakers are
connected correctly.
Check the speaker connections for proper
polarity (+ or –).
12
W-2:OVER 24m (80ft)
The distance between the nearest speaker
and the furthest speaker is out of adjustable
range.
Bring the speaker closer to the listening
position.
—
W-3:LEVEL ERROR
The difference of volume level among
speakers is excessive. (No level correction
is made.)
If “SWFR:TOO LOUD” or “SWFR:TOO
LOW” appears, adjust the output volume of
the subwoofer.
24, 59
Readjust the speaker installation so that all
speakers are set in locations with similar
conditions.
—
Check the speaker connections.
11
Use speakers of similar quality.
—
Notes
_RX-V463_G_all.book Page 76 Tuesday, February 5, 2008 1:24 PM
- AV Receiver 1
- ■ For U.K. customers 2
- Contents 3
- Features 4
- Getting started 5
- Step 1: Set up your speakers 7
- ■ For further connections 8
- Step 3: Press SCENE 1 button 9
- Quick start guide 10
- Connections 11
- Placing speakers 12
- Connecting speakers 13
- 1 Loosen the knob 14
- ■ Audio jacks 15
- ■ Video jacks 15
- Information on HDMI™ 16
- Audio and video signal flow 16
- Connecting video components 17
- Connecting other components 18
- ■ Connecting a set-top box 19
- Connecting audio components 20
- Connecting the FM and AM 22
- Connecting the power cable 22
- Turning on and off the power 23
- Input channel indicators 25
- LFE indicator 25
- Approximately 6 m (20 ft) 25
- Optimizer 26
- Optimizer microphone 26
- 5 Press 27
- 6 Press 27
- 7 Press 28
- 8 Press 28
- 9 Press 28
- – –” is displayed instead 29
- Selecting the SCENE templates 30
- OPERATION 31
- Creating your original SCENE 33
- SCENE buttons 34
- Playback 35
- Selecting audio input jacks 36
- Selecting the MULTI CH INPUT 36
- Using your headphones 37
- Muting the audio output 37
- Playing video sources in the 38
- Displaying the input source 38
- Using the sleep timer 39
- Sound field programs 40
- Using audio features 43
- Lights up 45
- No colon (:) 45
- Automatic preset tuning 46
- Manual preset tuning 46
- Selecting preset stations 47
- Exchanging preset station 47
- Frequency display 48
- Flashes Lights up 50
- USB memory device 51
- 3 Press 52
- 4 Press 52
- Using iPod™ 53
- 1 Press 54
- 2 Press 54
- Using Bluetooth™ components 55
- Recording 56
- Using SET MENU 58
- ■ Speaker level B)SP LEVEL 61
- ■ HDMI set H)HDMI SET 63
- Remote control features 69
- While holding down 71
- Press for 3 71
- Advanced setup 72
- Troubleshooting 73
- ADDITIONAL 75
- INFORMATION 75
- After AUTO SETUP 78
- ■ Remote control 82
- ■ Resetting the system 82
- Glossary 83
- Specifications 85
- Características 92
- Primeros pasos 93
- Guía de inicio rápido 94
- Paso 1: Instalación de sus 95
- DVD y otros componentes 96
- ¿Qué quiere hacer con esta 98
- Conexiones 99
- Colocación de los altavoces 100
- Conexión de altavoces 101
- 1 Afloje la perilla 102
- ■ Jacks de audio 103
- ■ Jacks de vídeo 103
- Información activada HDMI™ 104
- Conexión de otros componentes 106
- PREPARACIÓN 107
- MULTI CH INPUT 108
- VIDEO AUX 109
- Conexión del cable de 110
- Encendido y apagado de esta 111
- FD ECA B098 112
- 23 456 7 112
- Indicador LFE 113
- 6 m aproximadamente 113
- Micrófono 114
- Micrófono optimizador 114
- 5 Pulse 115
- 6 Pulse 115
- 7 Pulse 116
- 8 Pulse repetidamente 116
- 9 Pulse 116
- ■ Si aparece “WARNING” 117
- Selección de plantillas SCENE 118
- FUNCIONAMIENTO 119
- 2 Mantenga pulsado el botón 121
- 3 Pulse 121
- 4 Pulse de nuevo el botón 121
- Botones SCENE 122
- Reproducción 123
- (AUDIO SELECT) 124
- Selección del componente 124
- Uso de sus auriculares 125
- Silencia la salida de audio 125
- 1 Pulse 126
- 2 Pulse repetidamente 126
- 4 Pulse de nuevo 126
- SLEEP 120min SLEEP 90min 127
- Programas de campos acústicos 129
- Ajuste de la calidad tonal 131
- Effect.Lvl:MID 132
- Se enciende 133
- Sin dos puntos (:) 133
- Presintonización automática 134
- Presintonización manual 134
- Parpadea 135
- Visualización de frequencias 136
- Parpadea Se enciende 138
- Dispositivo de 139
- 4 Pulse 140
- Utilización iPod™ 141
- 2 Pulse 142
- Reproducción del componente 143
- Bluetooth™ 143
- Grabación 144
- SET MENU 145
- Utilización SET MENU 146
- 1 SOUND MENU 147
- SUBWOOFER OUTPUT 150
- ■ Ajuste HDMI H)HDMI SET 151
- 2 INPUT MENU 152
- 3 OPTION MENU 154
- ■ Control de esta unidad 157
- ■ Control de un TV 157
- FREQ/TEXT EON 158
- MODE - PTY SEEK - START 158
- Mientras lo mantiene pulsado 159
- Pulse durante 159
- 3 segundos 159
- Ajuste avanzado 160
- Solución de problemas 161
- INFORMACIÓN 163
- ADICIONAL 163
- ■ Sintonizador 164
- ■ AUTO SETUP 165
- Después de AUTO SETUP 166
- W-1:OUT OF PHASE 166
- W-2:OVER 24m (80ft) 166
- W-3:LEVEL ERROR 166
- ■ Bluetooth 169
- ■ Mando a distancia 170
- ■ Reposición del sistema 170
- Glosario 171
- Especificaciones 173
- Índice alfabético 174
- 警告：操作本机前请认真阅读。 178
- 1 打开电池舱盖。 181
- 2 请按照位于电池舱内侧的极性标记 (+ 和 -)， 181
- 3 将电池舱盖返回原位。 181
- 步骤 1: 设置您的扬声器 183
- 步骤 2: 连接您的 DVD 播放机和 184
- 步骤 3: 按 SCENE 1 按钮 185
- 您想使用本机做什么？ 186
- • 在连接扬声器之前，请确认交流电源插头从墙壁插座上拔下。 189
- FRONT B 端子 189
- 2 将电线的裸露端插入该端子的孔中。 190
- 3 拧紧旋钮以固定电线。 190
- 插孔和缆线插头的有关信息 191
- 音频和视频信号流向 192
- ■ 连接 DVD 播放机 194
- ■ 连接 DVD 刻录机，PVR 或 VCR 195
- ■ 连接 CD 播放机和 CD 刻录机 /MD 录音机 196
- ■ 连接多格式播放机或外部解码器 196
- Yamaha iPod 多用平台或 197
- Bluetooth 适配器 197
- 游戏机或视频摄像机 197
- 视频输出 音频输出 197
- 连接 FM 和 AM 天线 198
- 打开和关闭本机电源 199
- 控制超低音扬声器 （例） 202
- 4 务必将 “SETUP”设置为 “AUTO”，并将指针指 203
- 扬声器连接和配线的结果 204
- 从收听位置到扬声器的距离 204
- 扬声器尺寸的结果 204
- 扬声器输出水平的结果 204
- - -”被显示。 205
- 选择 SCENE 模板 206
- 选择期望的 SCENE 模板 206
- ■ 您期望选择哪个 SCENE 模板？ 207
- ■ 预设 SCENE 模板详情 208
- 建立自己独特的 SCENE 模板 209
- SCENE 按钮 210
- Movie Dramatic 211
- 选择视频输入插孔 212
- （AUDIO SELECT） 212
- 选择 MULTI CH INPUT 组件机 212
- 在视频监视器上显示本机的当前 213
- 在音源背景中播放视频源 214
- 显示输入源的信息 214
- ENTERTAINMENT 216
- MUSIC ENHANCER 216
- 1 在收听一个音源时，按下 218
- 2 按下 7k / n，选择您想要改变的参数。 218
- 3 按 7l / h 以改变参数值。 218
- “DIRECT”。 219
- 选择夜间收听模式 220
- FM/AM 调谐 221
- A1:FM 88.90MHz 222
- A3:FM 88.90MHz 222
- E1:FM 88.90MHz 223
- A5:FM 88.90MHz 223
- 无线电数据系统调谐 ( 仅限欧洲和俄国型号 ) 224
- 显示无线电数据系统信息 224
- 选择无线电数据系统节目类型 225
- （PTY SEEK 模式） 225
- 使用加强的其他网络 226
- （EON）数据服务 226
- USB 存储器或 227
- USB 便携式音频 227
- 3 按下遥控器的 228
- ■ 遥控器操作 ■ 在简单遥控模式控制 iPod 229
- 蓝牙 （Bluetooth 231
- 1 打开所有连接的组件机。 232
- 3 在选择的声源组件机上开始播放或选择一个广播 232
- 4 开始在录制组件机上的录制。 232
- 使用 SET MENU 234
- • 如果您不想反转超低音扬声器的相位，请选择 236
- • 要反转超低音扬声器的相位，请选择 236
- ■ 扬声器水平 B)SP LEVEL 237
- ■ 扬声器距离 C)SP DISTANCE 237
- ■ HDMI 设置 H)HDMI SET 239
- XM SIRIUS 240
- 4 重复步骤 1 到 3 以重新命名每个输入源。 241
- ■ 音频选择 C)AUDIO SELECT 243
- ■ 参数初始化 D)PARAM. INI 243
- ■ USB 播放风格 F)USB PLAY STYLE 244
- 操作本机，电视机，或其他组件机 245
- ■ 控制其它组件机 246
- 1 在按住遥控器上的输入选择按钮 ( 247
- 2 按数字按钮 （0 到 9）( 247
- ■ 调谐器频率步长 TU 248
- （仅限亚洲和通用型号） 248
- ■ 初始化 INIT 248
- 状态讯息 原因 措施 257
- B 信号和 PR 信号。 由于每个这些信号 259
- * 规格时有变更，恕不另行通知。 261
- VIDEO AUX USB 265
- APPENDIX 266
- List of remote control codes 267
- TV/DVD/VCR 270
- RTKAGLEF 272
- Printed in China 273
Related products and manuals for AV receivers Yamaha RX-V463
AV receivers Yamaha RX-V1067 User Manual
(2 pages)
(2 pages)
AV receivers Yamaha RX-V373 Setup Guide
(18 pages)
(18 pages)
AV receivers Yamaha RX-V2067 Owner's Manual
(149 pages)
(149 pages)
AV receivers Yamaha RX-V371 Owner's Manual
(72 pages)
(72 pages)
AV receivers Yamaha RX-A3000 Owner's Manual
(164 pages)
(164 pages)
AV receivers Yamaha RX-V1065 Manual
(316 pages)
(316 pages)
AV receivers Yamaha RX-V3079 Owner's Manual
(191 pages)
(191 pages)
AV receivers Yamaha MCR-550 Manual
(70 pages)
(70 pages)
AV receivers Yamaha YHT-1094 Owner's Manual
(120 pages)
(120 pages)
AV receivers Yamaha RX-A1020 Setup Guide
(18 pages)
(18 pages)
AV receivers Yamaha RX-V575 Setup Guide
(18 pages)
(18 pages)
AV receivers Yamaha RX-A730 Setup Guide
(18 pages)
(18 pages)
AV receivers Yamaha RX-V1073 Setup Guide
(18 pages)
(18 pages)
AV receivers Yamaha NS-P20 Owner's Manual
(20 pages)
(20 pages)
AV receivers Yamaha RX-V471 Owner's Manual
(91 pages)
(91 pages)
AV receivers Yamaha RX-V663 Manual
(534 pages)
(534 pages)
AV receivers Yamaha RX-A820 Setup Guide
(18 pages)
(18 pages)
AV receivers Yamaha RX-V567 Owner's Manual
(92 pages)
(92 pages)
AV receivers Yamaha RX-V371 Owner's Manual
(72 pages)
(72 pages)
AV receivers Yamaha RX-797 Manual
(265 pages)
(265 pages)
© 2020, manymanuals.com. All rights reserved. | 1.512 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals