Yamaha RX-V2065 Owner's Manual download pdf (Page 57)

100

53 En

Operating various settings for this unit (Setup menu)

English

INTRODUCTION

ADDITIONAL

INFORMATION APPENDIX

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

■ Max Volume

Sets the maximum volume level so that the volume will

not be accidentally increased. For example, you can adjust

the volume between –80.0 dB and –5.0 dB (or Mute) when

you set this parameter to “–5.0dB”. The volume increases

to the maximum level when this parameter is set to +16.5

dB (default).

■ Initial Volume

Sets the volume at the time this unit is turned on. When

this parameter is set to “Off”, the volume level used when

this unit was set to standby is applied.

Note

• When you set “Max Volume” and “Initial Volume” the setting of “Max

Volume” becomes effective. For example, when you set “Max Volume”

to “–30.0dB” and “Init. Volume” to “0.0dB”, the volume is

automatically set to “–30.0dB” at the next time this unit is turned on.

Changes input source names to be displayed on the front

panel display.

Selecting a name to be displayed from templates

Press jCursor k / n to select the input source name to

edit and then press jCursor l / h to select a new

name from the templates (Blu-ray, DVD, SetTopBox,

etc.).

Entering an original name

Press jCursor k / n to select the input source name to

edit and then press jENTER. Enter up to 9 characters

by selecting one character at a time with the following key

operations.

The following characters are available for input.

A to Z, 0 to 9, a to z, symbols (#, *, –, +, etc.) and space

Sets the maximum volume level and initial volume level

of Zone2/3.

• The menu items for Zone2 are available only when “Extra Speaker

Assignment” is set to “Zone2” or “Zone2 + Zone3” (page 49).

• The menu items for Zone3 are available only when “Extra Speaker

Assignment” is set to “Zone2 + Zone3” (page 49).

■ Zone2/3 Max Volume

Sets the maximum volume level of Zone2/3, so that the

volume will not be accidentally increased. For example,

you can adjust the volume between –80.0 dB and –5.0 dB

when you set this parameter to “–5.0dB”.

■ Zone2/3 Initial Volume

Use this feature to set the volume level of Zone2/3 when

the power of Zone2/3 unit is turned on. When this

parameter is set to “Off”, the volume level used at the time

when the Zone2/3 unit was set to standby is applied.

Note

• The “Zone2 Max Volume” or “Zone3 Max Volume” setting takes priority

over the “Zone2 Initial Volume” or “Zone3 Initial Volume” setting. For

example, if you set “Zone2 Max Volume” to “–30.0dB” and “Zone2

Initial Volume” to “0.0dB”, the volume is automatically set to “–30.0dB”

at the next time the Zone2 unit is turned on.

You can set items for network features.

■ IP Address

Sets the network parameters (IP address, etc).

DHCP

Select whether or not this unit obtain the network

parameters (IP address, subnet mask, default gateway,

primary DNS server and secondary DNS server) from the

DHCP server of the connected network.

IP Address

Use this parameter to specify the IP address assigned to

this unit. This value must not be the same as the one used

for other devices in the target network.

Subnet Mask

Use this parameter to specify the subnet mask value

assigned to this unit.

Default Gateway

Use this parameter to specify the IP address of the default

gateway.

DNS Server (P) / DNS Server (S)

Use this parameter to specify the IP address of the primary

and secondary DNS (Domain Name System) servers.

• If you have only one DNS address, enter the DNS address in “DNS

Server (P)”. If you have two or more DNS addresses, enter one of them in

“DNS Server (P)” and another in “DNS Server (S)”.

■ MAC Address Filter

Sets MAC address filter to restrict access to this unit via

LAN.

MAC Address Filter

Select whether or not to use the MAC address filter

function.

Adjustable range: –30.0dB to +15.0dB, +16.5dB* (5.0 dB step)

Adjustable range: Off*, Mute, –80.0dB to +16.5dB (0.5 dB step)

Input Rename

jCursor l / h Selects a character to edit.

jCursor k / n Selects a character to enter.

jENTER Enters a selected character.

Zone

Adjustable range: –30.0dB to +15.0dB, +16.5dB* (5.0 dB step)

Adjustable range: Off*, Mute, –80.0dB to +16.5dB (0.5 dB step)

Network

Choices: On*, Off

On Select this setting when this unit can obtain

the network parameters from the DHCP

server of the connected network.

Off Select this setting when you set the network

parameters manually.

Choices: Off*, On

Off Disables the MAC address filter function.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 99 100

Comments to this Manuals

No comments

Yamaha RX-V2065 Owner's Manual Page 57

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V2065