Yamaha RX-V2065 Owner's Manual download pdf (Page 28)

100

24 En

BASIC OPERATION

1 Turn on external components (TV, DVD

player, etc.) connected to this unit.

2 Rotate the TINPUT selector (or press

dInput selection key) to select an input

source.

If you press dUSB/NET on the remote control,

press wSub-input selection key to select a

sub-input source.

The name of the selected input source is displayed for

a few seconds.

• If you connect two video monitors to the HDMI OUT jacks of this

unit, press gHDMI OUT repeatedly to select the active video

monitor(s) (page 42).

• You can also select an input source from the GUI screen (page 25).

• You can change the input source name displayed on the front panel

display or GUI screen as necessary (page 53).

3 Play the external component that you have

selected as the source input, or select a radio

station on the tuner.

Refer to the operating instructions of the external

component for details on playback. For selecting

radio stations or playback of an iPod, Bluetooth

component, USB storage device or network contents

using this unit, see the following.

• FM/AM radio tuning (page 31)

• iPod playback (page 35)

• Bluetooth component playback (page 37)

• USB storage device playback (page 38)

• Internet Radio playback (page 41)

• PC playback (page 39)

4 Turn the KVOLUME control (or press

tVOLUME +/–) to adjust the volume.

This unit has a SCENE function that allows you to change

input sources and sound field programs with one key. Four

scenes are available for different usages, such as playing

movies or music. The following input sources and sound

field programs are provided as the initial factory settings.

• When this unit is on standby, you can turn on this unit by pressing

RSCENE (or hSCENE).

• If you connect a Yamaha DVD/CD player that has the capability of the

SCENE control signals to the REMOTE OUT jack of this unit, you can

start playback on the player by using the SCENE function.

Press RSCENE (or hSCENE).

• You can also select a SCENE from the GUI screen (page 25).

Select the desired input source/sound field

program and then press and hold RSCENE (or

hSCENE) to edit until “SET Complete” appears

on the front panel display.

• If you change the input source setting, register the remote control code of

an external component to the input source (page 61).

Playback

Basic procedure

VOL.

AV1

Input source name

VOL.

SL SR

Volume-18.5dB

Volu me

Note

When you play back a DTS-CD, noise may be output in some

conditions, which may cause a speaker malfunction. Make sure

that the volume is set to low before starting playback. If noise is

output, do the following.

1) When only noise is output

If a DTS bitstream signal is not properly input to this unit,

only noise is output. Connect the playback component to this

unit by digital connection and play back the DTS-CD. If the

condition is not improved, the problem may results from the

playback component. Consult the manufacturer of the

playback component.

2) When noise is output during playback or skip operation

Before playing back the DTS-CD, display the Option menu

after selecting the input source and set “Decoder Mode” to

“DTS” (page 43).

Using the SCENE function

Keys Input source Sound field program

BD/DVD HDMI 1 Straight

TV AV 1 Straight

CD AV 3 Straight

RADIO TUNER 7ch Enhancer

Selecting a SCENE

Registering input source/sound field

program to SCENE

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 99 100

Comments to this Manuals

No comments

Yamaha RX-V2065 Owner's Manual Page 28

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V2065