Yamaha RX-V2065 Manual download pdf (Page 61)

57 En

Operating various settings for this unit (Setup menu)

English

INTRODUCTION

ADDITIONAL

INFORMATION APPENDIX

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

Reverb Level

Reverb Level parameter adjusts the reverberation sound

level. Increasing the value of Reverb Level makes the

reverbration sound level higher, which allows you to

create more echo.

■ Parameter for MOVIE sound field programs

Decode Type

Selects the decoder type for use with the MOVIE sound

field programs.

Note

• You cannot select a decoder for the following MOVIE sound field

programs.

– Mono Movie

– Sports

– Action Game

– Roleplaying Game

■ Parameter for 2ch Stereo

Direct

Automatically bypasses the DSP circuit and tone control

circuit when an analog sound source is selected as the

input source. You can enjoy a higher quality sound.

■ Parameters for 7ch Stereo

Center Level / Surround L Level / Surround R

Level / Surround Back Level / Presence L Level /

Presence R Level

Adjusts the volume of the center, surround L/R, surround

back and presence L/R channels in the 7ch Stereo

program. The available parameters differ depending on the

setting of the speakers.

■ Parameter for Straight Enhancer and 7ch

Enhancer

Effect Level

Adjusts the Compressed Music Enhancer effect level.

When the high-frequency signals of the source is

emphasized too much, set the effect level to “Low”. To

reduce the effect, set this parameter to “Low”.

You can customize decoder effects by setting the

following parameters. For details about the types of

decoders, see “Surround decode mode” (page 29).

■ Parameter for PLIIx Music and PLII Music

Panorama

Adjusts the soundscape of the front sound field. Sends

stereo signals to the surround speakers as well as the front

speakers for a wraparound effect.

Dimension

Adjusts the difference in level between the front sound

field and the surround sound field. You can adjust the

difference in level created by the software being played

back to obtain the preferred sound balance. The surround

sound gets stronger as you make the value more negative

and the front sound gets stronger as you make the value

more positive.

Center Width

You can spread the center sound toward left and right

according to your preference. Set this parameter to 0 for

outputting the center sound from the center speaker only,

or to 7 for outputting it from the front left/right speaker.

■ Parameter for Neo:6 Music

Center Image

Adjusts the front left and right channel output relative to

the center channel to make the center channel more or less

dominant as necessary.

Protects the Setup menu settings against accidental

alteration.

Note

• When this parameter is switched to “On”, “ ” appears at the top left

corner of the Setup menu screen.

Adjustable range: 0 to100%

Parameters for certain sound field

programs

Choices: PLIIx Movie (PLII Movie), Neo:6 Cinema

Choices: Auto*, Off

Auto Outputs sound by bypassing the DSP circuit and

tone control circuit when the “Bass” and “Treble”

tone controls are both set to 0 dB.

Off Do not bypass the DSP circuit and tone control.

Adjustable range: 0 to 100%

Time

Level

Source sound

Reverb Level

(dB)

Choices: High*, Low

Decoder parameters

Choices: Off*, On

Adjustable range: –3 to STD* to +3

Adjustable range: 0 to 3* to 7

Adjustable range: 0.0 to 0.3* to 1.0

Memory Guard

Choices: Off*, On

Off Not protect settings.

On Protects the Setup menu settings (except for

“Decode Type” in “DSP Parameter” and

“Memory Guard”).

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 355 356

Comments to this Manuals

No comments

Yamaha RX-V2065 Manual Page 61

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V2065