Yamaha RX-S602 Owner's Manual download pdf (Page 94)

Adjusting the volume of each speaker

Adjusts the volume of each speaker to suit your listening position.

Setup menu

“Speaker” > “Level”

Choices

Front L, Front R, Center, Surround L, Surround R, Subwoofer

Setting range

-10.0 dB to +10.0 dB (0.5 dB increments)

Note

Test tone output helps you to adjust the speaker balance while confirming its effect. For details, see the

following:

▪ “Outputting test tones” (p.95)

Setting the equalizer

Selects the type of equalizer to be used and adjusts the tone.

Setup menu

“Speaker” > “Equalizer” > “EQ Select”

Settings

PEQ

Applies the parametric equalizer values obtained by the YPAO

measurement.

GEQ Select this option when you want to adjust the equalizer manually.

Off Does not use the equalizer.

When selecting “GEQ”

Use the cursor keys to select “Channel” and to select the desired

speaker channel.

Use the cursor keys to select the desired band (frequency) and to

adjust the gain.

Setting range

-6.0 dB to +6.0 dB

Press SETUP.

This completes the settings.

Note

▪ Test tone output helps you to adjust the equalizer while confirming its effect. For details, see the following:

– “Outputting test tones” (p.95)

▪ “PEQ” is available only when the YPAO has been performed. For details on the YPAO, see the following:

– “Optimizing the speaker settings automatically (YPAO)” (p.33)

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 152 153

No comments

Yamaha RX-S602 Owner's Manual Page 94