Yamaha RX-S602 Owner's Manual download pdf (Page 143)

Turn on the unit and playback devices and then turn on the TV.

Switch the TV input to display the video from the unit.

Check that the input, to which the playback device is connected

on the unit, is selected.

If not, select the input source manually.

Check that the video from the playback device is displayed on the

TV.

Check that the unit is properly synchronized with the TV by

turning off the TV or adjusting the TV volume with the TV remote

control.

Note

▪ If HDMI Control does not work properly, the problem may be solved by turning the playback device off and

on again, or by unplugging the power plug and plugging it in again. Also, HDMI Control may not work

properly if the number of connected devices exceeds the limit. In this case, disable HDMI Control on

devices not in use.

▪ If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting

on the TV.

▪ We recommend using TV and playback devices from the same manufacturer so that HDMI Control works

more effectively.

Audio Return Channel (ARC)

ARC allows you to input TV audio to the unit with the HDMI cable which transmits video

signal to the TV.

Check the following after the HDMI Control settings.

Note

For details on the HDMI Control settings, see the following:

▪ “HDMI Control and synchronized operations” (p.142)

Select a TV program with the TV remote control.

Check that the input source of the unit will be automatically

switched to “AV 1” and the TV audio will be played back on the

unit.

If you cannot hear the TV audio, check the following:

• “ARC” in the “Setup” menu is set to “On”. For details, see the following:

– “Setting the use of ARC” (p.97)

• The HDMI cable is connected to the ARC-compatible HDMI jack (HDMI jack marked

“ARC”) on the TV.

Some HDMI jack on the TV is not compatible with ARC. For details, refer to the

instruction manual for the TV.

Note

▪ If the audio is interrupted while using ARC, set “ARC” in the “Setup” menu to “Off” and use a digital optical

cable to input TV audio to the unit. For details, see the following:

– “Setting the use of ARC” (p.97)

– “OPTICAL jack” (p.137)

▪ When using ARC, connect a TV with an HDMI cable that supports ARC.

▪ “AV 1” is set as TV audio input at the factory. If you have connected any external device to the AV 1 jacks,

use “TV Audio Input” in the “Setup” menu to change the TV audio input assignment. To use the

SCENE

function, you also need to change the input assignment for SCENE (TV). For details, see the following:

–

“Setting the audio jack used for TV audio input” (p.97)

– “Registering a scene” (p.71)

143

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 152 153

Comments to this Manuals

No comments

Yamaha RX-S602 Owner's Manual Page 143

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-S602