Yamaha RX-S602 Owner's Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 153
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
2 Connecting a TV
HDMI connection with a TV
Connect a TV to the unit with an HDMI cable. If you connect a TV that supports ARC to
the unit, you can output video/audio to the TV or input TV audio to the unit.
AUDIO
2
AUDIO
3
AV
1
(TV)
OPTICAL
COAXIAL
COAXIAL
VIDEO
VIDEO
VIDEO
VIDEO
AV
2
AV
3
MONITOR OUT
AUDIO 1
1 (BD/DVD) 2 3
HDMI
(HDCP 2.2)
HDMI
OUT
(HDCP 2.2)
ARC
ANTENNA
FM
(
RADIO
)
HDMI
HDMI
HDMI
HDMI
OUT
(HD
CP 2.2)
HDMI
HDMI
HDMI
(ARC)
The unit (rear) HDMI OUT jack
HDMI input
TV
About Audio Return Channel (ARC)
ARC allows audio signals to travel both ways with a single HDMI cable. To use ARC, connect to the TV
using an HDMI cable that supports ARC.
Note
If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s
power and volume with the TV’s remote control.
To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For details on the
settings, see the following:
“HDMI Control and synchronized operations” (p.142)
“Audio Return Channel (ARC)” (p.143)
If your TV does not support Audio Return Channel (ARC), a digital optical cable connection between the
TV and the unit is needed.
VIDEO (composite video) connection with a TV
Connect a TV to the unit with a video pin cable and a digital optical cable.
AUDIO
2
AUDIO
3
SUBWOOFER
PRE OUT
AV
1
(TV)
OPTICAL
COAXIAL
COAXIAL
VIDEO
VIDEO
VIDEO
VIDEO
AV
2
AV
3
MONITOR OUT
AUDIO 1
1 (BD/DVD) 2 3
HDMI
(HDCP 2.2)
HDMI
OUT
(HDCP 2.2)
ARC
ANTENNA
FM
(
RADIO
)
OPTICAL
AV 1
(TV)
VIDEO
OPTICAL
O O
MONITOR OUT
VIDEO
V
V
The unit (rear)
AV 1 (OPTICAL) jack
MONITOR OUT (VIDEO) jack
Video input
(composite video)
Audio output
(digital optical)
TV
Note
If you connect your TV to the unit with a cable other than HDMI, video input to the unit via HDMI cannot be
output to the TV. For details, see the following:
“Video signal flow” (p.141)
Operations with TV screen are available only when your TV is connected to the unit via HDMI.
A digital optical cable connection allows audio from the TV to be played back on the unit. A digital optical
cable connection is not needed in the following case:
If you will receive TV broadcasts only from the set-top box
En
24
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 152 153

Comments to this Manuals

No comments