Yamaha NS-PB120 Manual download pdf (Page 7)

Specifications

6 En

English

■ Operating the speaker terminals

1 Rotate the speaker terminal counterclockwise to

loosen it.

2 Insert the bare wire.

3 Rotate the speaker terminal clockwise to tighten

it.

4 Test the security of the connection by pulling

gently on the cable.

Notes

• Make sure the terminal is gripping the bare wire, not

the insulation.

• Make sure the bare wires do not touch each other, as

this could damage the speaker or amplifier.

• If the connections are faulty, you will hear no sound

from the speakers.

■ Connecting to an amplifier

Connect each speaker to the appropriate speaker terminals on your amplifier by using the cables you prepared earlier.

For details, see “Connection diagram” (page 5).

Make sure you connect the speakers with the correct polarity—positive (+) terminals to positive (+) terminals, and

negative (–) terminals to negative (–) terminals. If you get them crossed over, the sound will be unnatural and lack bass.

In your AV receiver’s speaker size settings, specify small (or “S”) for all of the NS-PB120 speakers.

Once you have connected all of the speakers, plug the amplifier and other AV components into suitable AC wall outlets.

Type................2-way acoustic suspension magnetic shielding type

Driver ...................................Woofer: 6.5 cm (2-1/2") cone type x 2

Tweeter: 2 cm (3/4") silk dome type

Nominal input power ................................................................30 W

Maximum input power ...........................................................100 W

Impedance ......................................................................................6 Ω

Frequency response ................................110 Hz – 46 kHz (-10 dB)

– 100 kHz (-30 dB)

Sensitivity ...............................................................82 dB/2.83 V, 1 m

Dimensions (W x H x D)

NS-B120 ........................150 x 305 x 99 mm (5-7/8 x 12 x 3-7/8")

NS-C120...................305 x 150 x 99 mm (12 x 5-7/8 x 3-7/8") *1

305 x 133 x 125 mm (12 x 5-1/4 x 4-1/2") *2

NS-C120

Weig ht ...........................................................................1.8 kg (4.0 lbs)

Specifications are subject to change without notice.

Positive (+)

Negative (–)

Loosen

Tighten

Specifications

*1 *2

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comments to this Manuals

No comments

Yamaha NS-PB120 Manual Page 7

Comments to this Manuals

Related products and manuals for AV receivers Yamaha NS-PB120