Yamaha MCR-550 Manual Page 25

  • Download
  • Add to my manuals
  • Print
  • Page
    / 56
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 24
TROUBLESHOOTING
23 En
ADDITIONAL
INFORMATION
English
In case of a transmission error without a status message appearing in the front panel of this unit, check the connection to the USB device
(see page 9).
USB
Note
Status message Cause Remedy Page
USB Unplugged
The USB device is not connected
firmly.
Connect the USB device again.
9
No Files
The connected USB device is not
playable on this unit.
Connect playable USB device.
9
The USB device has no data. Connect an USB device with data included.
9
USB OverCurrent
The connected USB device is not
playable on this unit.
Disconnect the USB device. Change input source
other than USB and select USB as input source
again. Then connect playable USB device again.
9
The USB device is connected at an
angle.
Problem Cause Remedy Page
MP3/WMA file in the
USB device does not
play.
The USB device is not recognized. Connect the USB device again.
9
Connect an AC adapter if supplied with the device.
Improper USB device connections. Connect the USB device again.
9
The MP3 or WMA formats are not
compatible with this unit.
Replace the file with a correctly recorded file
playable with this unit.
3
If the solutions above do not resolve the
problem, the USB device is not playable
on the unit.
Try another USB device.
Disc playback
Problem Cause Remedy Page
No sound or
distorted sound
The sampling rate of an MP3 or WMA
file may not be compatible with this unit.
Check the sampling rate and bit rate of an MP3 or
WMA file are compatible with this unit.
3
Disc playback does
not start.
You may be using a CD-R/RW that is not
finalized.
Finalize the CD-R/RW.
The disc label may be upside down. Check that the disc label is facing up.
The disc may be defective. Try playing back another disc. If this cures the
problem, the disc you want to play back is defective.
MP3/WMA disc may not contain
sufficient music files to be played back.
Check that your MP3/WMA disc contains at least
5 MP3/WMA music files. If the number of files is
small, the disc may not be recognized.
The sampling rate of an MP3 or WMA
file may not be compatible with this unit.
Check the sampling rate and bit rate of an MP3 or
WMA file are compatible with this unit.
3
Some button
operations do not
work.
The disc loaded into the unit may not be
compatible.
Remove the disc and then check whether the unit
supports the disc or not.
3
Continued to the next page
\
Page view 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 55 56

Comments to this Manuals

No comments