Yamaha MCR-550 Manual download pdf (Page 21)

USING USEFUL FUNCTIONS

19 En

OPERATION

English

■ Performing DAB CLEAR and INIT SCAN

DAB CLEAR: Deletes all DAB station information and preset settings stored in the unit. After DAB CLEAR is

complete, the unit moves to the INIT SCAN functions automatically. Note that once DAB CLEAR is performed, the

deleted information and preset settings cannot be restored.

INIT SCAN: Performs the initial scan manually. Each time you perform INIT SCAN, the newly received stations are

added to the previously received stations.

* After performing INIT SCAN, the unit airs the first station as stored in station.

■ Using TUNE AID

TUNE AID: Measures reception strength of the received DAB signal (from 0 (none) to 100 (best)). Adjust the DAB/

FM antenna to find the best position to receive the DAB signal.

To check the frequency corresponding to the channel label, refer to “DAB frequency information” on page 14.

■ Setting STATION ORDER and DRC MODE

Follow the operation procedure on page 17.

STATION ORDER: Enables you to change the station order. Set to ENSEMBLE to list the stations in ensemble order.

The default setting is ALPHANUMERIC.

DRC MODE: Changes the DRC (☞ P. 14, 17) setting. This function utilizes DRC automatically if it is

transmitted.The default setting is AUTO.

Using DAB option menu (U.K. and Australia models)

Press OPTION. Select desired

option menu.

Confirm with

ENTER.

“Press ENTER”

appears. Press

ENTER to perform*.

1 2 3 4

Exit option

menu.

Press OPTION. Select TUNE AID. Confirm with

ENTER.

Switch the channel label. Exit TUNE AID.

1 2 3 4 5

Exit option

menu.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 55 56

No comments

Yamaha MCR-550 Manual Page 21