Yamaha HTR-5065 Owner's Manual download pdf (Page 12)

PREPARATIONS ➤ Placing speakers En 12

Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the

representative speaker layout examples.

* HTR-5065 only

• HTR-5065 supports 2- to 7.1-channel system, and HTR-4065 supports 2- to 5.1-channel speaker system.

1 Placing speakers

Caution

• (U.S.A. model only)

Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. In this case, you can also use 4-ohm speakers as the front speakers.

For details, see “Setting the speaker impedance” (p.14).

• (Except for U.S.A. model)

Use speakers with an impedance of at least 6 Ω.

Speaker type Abbr. Function

Speaker system (the number of channels)

7.1* 6.1* 5.1 4.1 3.1 2.1

Front (L) 1

Produce front right/left channel sounds (stereo sounds).

●●●●●●

Front (R) 2 ●●●●●●

Center 3 Produces center channel sounds (such as movie dialogue and vocals). ●●● ●

Surround (L) 4

Produce surround right/left channel sounds.

●●●●

Surround (R) 5 ●●●●

Surround back (L)* 6

Produce surround back left/right channel sounds.

●

Surround back (R)* 7 ●

Surround back* 8 Produces sounds mixed from surround back left/right channel sounds. ●

Subwoofer 9

Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.

This channel is counted as “0.1”.

●●●●●●

Speaker placement

2 3 4 5 6 7 8 9 10

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 107 108

Comments to this Manuals

No comments

Yamaha HTR-5065 Owner's Manual Page 12

Comments to this Manuals

Related products and manuals for AV receivers Yamaha HTR-5065