Yamaha CRX-330 Owner's Manual download pdf (Page 35)

31 En

English

TROUBLESHOOTING

ADDITIONAL

INFORMATION

In case of a transmission error without a status message appearing in the front panel of this unit, check the connection to the USB device

(see page 12).

USB

Note

Status message Cause Remedy

See

page

Not Connected

The USB device is not connected firmly. Connect the USB device again.

Not Supported

Connected the USB device not playable on this unit. Connect playable USB device.

Over Current

Connected the USB device not playable on this

unit.

Connected the USB device diagonally.

Disconnect the USB device. Change input source

other than USB and select USB as input source again.

Then connect playable USB device again.

Disc Playback

Problem Cause Remedy

See

page

Power turns on but

immediately shuts

off.

The power cable is not connected or the plug is not

completely inserted.

Connect the power cable firmly.

No sound or

distorted sound

The sampling rate of a MP3 or WMA file may not

be compatible with this unit.

Check the sampling rate and bit rate of an MP3 or

WMA file are compatible with this unit.

Disc playback does

not start.

You may use a CD-R/RW that is not finalized. Finalize the CD-R/RW.

—

The disc label may not be facing up. Check that the disc label is facing up.

—

The disc may be defective. Try to play back another disc. If the same problem does

not happen, the disc you want to play back is defective.

—

MP3/WMA disc may not contain sufficient music

tracks to be played back.

Check that your MP3/WMA disc contains at least 5

MP3/WMA music files. If the number of files is

small, the disc may not be recognized.

—

The sampling rate of a MP3 or WMA file may not

be compatible with this unit.

Check the sampling rate and bit rate of an MP3 or

WMA file are compatible with this unit.

USB playback does

not start.

Improper USB device connections. Connect the USB device again.

The MP3 or WMA formats are not compatible with

this unit.

Replace the file with a correctly recorded file

playable with this unit.

Remote control

Problem Cause Remedy

See

page

The remote control

does not work nor

function properly.

The remote control may be operated outside its

operation range.

For information on the remote control operation

range, refer to “Using the remote control”.

The remote control sensor on this unit may be

exposed to direct sunlight or lighting (invented

fluorescent lamps).

Change the lighting or orientation of this unit.

—

The battery may be worn out. Replace the battery with new one.

There are obstacles between the sensor of this unit

and the remote control.

Remove the obstacles.

—

1 2 ... 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Yamaha CRX-330 Owner's Manual Page 35

Comments to this Manuals

Related products and manuals for AV receivers Yamaha CRX-330