Yamaha R-N402D Owner's Manual Page 57

  • Download
  • Add to my manuals
  • Print
  • Page
    / 64
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 56
55 En
Troubleshooting
ADDITIONAL
INFORMATION
Bluetooth
Problem Cause Remedy
See
page
A Bluetooth
connection cannot be
established.
The Bluetooth function of the unit is
disabled.
Enable the Bluetooth function in the “SETUP” menu.
47
Another Bluetooth device is already
connected to the unit.
Terminate the current Bluetooth connection and then
establish a new connection.
35
The unit and the Bluetooth device are too
far apart.
Move the Bluetooth device closer to the unit.
There is a device (such as microwave
oven and wireless LAN) that outputs
signals in the 2.4 GHz frequency band
nearby.
Move the unit away from those devices.
The Bluetooth device does not support
A2DP.
Use a Bluetooth device that supports A2DP.
Since this unit has been paired with more
than 20 Bluetooth devices, pairing
information has been deleted.
Try pairing again.
This unit can be paired with a maximum total of 20
Bluetooth devices for reception and transmission.
When the 21st device is registered, the least
frequently used pairing information is deleted.
34
No sound is
produced, or the
sound is interrupted
during playback.
The volume of the Bluetooth device is set
too low.
Turn up the volume of the Bluetooth device.
The Bluetooth device is not set to send
audio signals to the unit.
Switch the audio output of the Bluetooth device to the
unit.
The Bluetooth connection has been
terminated.
Establish a Bluetooth connection between the
Bluetooth device and the unit again.
34
The unit and the Bluetooth device are too
far apart.
Move the Bluetooth device closer to the unit.
There is a device (such as microwave
oven and wireless LAN) that outputs
signals in the 2.4 GHz frequency band
nearby.
Move the unit away from those devices.
Page view 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 63 64

Comments to this Manuals

No comments