Yamaha R-N303 Owner's Manual Page 55

  • Download
  • Add to my manuals
  • Print
  • Page
    / 65
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 54
51 En
Troubleshooting
English
ADDITIONAL
INFORMATION
Messages on the front display
The firmware on this
unit failed to update
via the network.
The network connection may not be good. Try connecting again after a while.
The unit cannot
connect to the
Internet via wireless
LAN router (access
point).
MAC address filtering may have been
enabled on the wireless LAN router
(access point).
This unit cannot connect to the Internet while MAC
address filtering is enabled on the access point.
Change the settings on the wireless LAN router
(access point) to allow this unit to connect.
Problem Possible cause Remedy
See
page
Message Possible cause Remedy
Access denied Access to the PC is denied. Configure the sharing settings and select the unit as a device to
which music contents are shared (p. 32).
Access error There is a problem with the signal path
from the network to the unit.
Make sure your router and modem are turned on.
Check the connection between the unit and your router (or hub)
(p. 13).
Check SP Wires The speaker cables short circuit. Twist the bare wires of the cables firmly and connect to the unit
and speakers properly.
No content There are no playable files in the selected
folder.
Select a folder that contains files supported by the unit.
Please wait The unit is preparing to connect to the
network.
Wait until the message disappears. If the message stays more than
3 minutes, turn off the unit and turn it on again.
Unable to play The unit cannot play back the songs stored
on the PC for some reason.
Check if the format of files you are trying to play is supported by
the unit. For information about the formats supported by the unit,
see “Supported devices and file formats” below.
If the unit supports the file format, but still cannot play back any
files, the network may be overloaded with heavy traffic.
Version error Firmware update via the Internet failed. Update the firmware again.
Page view 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 64 65

Comments to this Manuals

No comments