Yamaha M2500 User Manual download pdf (Page 25)

Control panel

M2500—Owner’s Manual 21

Talkback/oscillator section

A OSCILLATOR select switches

These switches select a test tone oscillator, and start

oscillation. Only one switch at a time can be selected.

The corresponding indicator will light to show the

switch that is turned on.

• PINK switch

This generates pink noise.

• 10 kHz/1 kHz/100 Hz switches

These generate a sine wave of the corresponding fre-

quency.

B OSCILLATOR ON switch

This switch turns the oscillator on/off.

C MIC jack

This is an XLR-3-31 input jack (unbalanced) for con-

necting a talkback mic. Mics of 50–600Ω impedance

are supported.

D TB/OSC control

This adjusts the level of the talkback or oscillator.

E ON switch

This is an on/off switch for the talkback. If this is on,

the indicator above the switch will light. If you wish

to use the oscillator, you must turn off this switch.

F AUX 1-2 switch

G AUX 3-6 switch

H AUX 7-10 switch

I AUX 11-14 switch

J ST switch

K MONO/C switch

These switches send the talkback or oscillator signal

to AUX buses 1–2, AUX buses 3–6, AUX buses 7–10,

AUX buses 11–14, the STEREO bus, and/or the

MONO/C bus. Each switch can be turned on/off

independently.

Note: The oscillator cannot be used together with

talkback. If you wish to use the oscillator, you must

turn off the talkback ON switch (5).

AUX11-14

MONO/C

AUX7-10

AUX3-6

AUX1-2

100Hz

1kHz

10kHz

PINK

TALKBACK

OSCILLATOR

TB/OSC

MIC

010

from CPU

MIC

TB/OSC

MONO/C

STEREO

AUX

5 4

KJ6789

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 49 50

Comments to this Manuals

No comments

Yamaha M2500 User Manual Page 25

Comments to this Manuals

Related products and manuals for Audio mixers Yamaha M2500