Yamaha EMX3000 Owner's Manual download pdf (Page 18)

14 Example setups

EMX3000—Owner’s Manual

■ Sending an independent mix to

the monitor speakers

1 Set the MONI 1 fader to the “10” posi-

tion.

2 Raise the MONI 1 controls for the chan-

nels that you wish to hear from the moni-

tor speakers.

3 Use the MONI 1 fader of the master sec-

tion to adjust the overall volume.

■ Using an external effect proces-

sor

You may sometimes want to use an external effect

processor, such as an echo machine or a multi-

effect unit.

Follow the steps below.

1 Set the EFFECT fader of the master sec-

tion to the “10” position.

2 Raise the EFFECT controls for the channels

to which you want the external effect to

be applied.

3 Use the EFFECT fader in the master sec-

tion to adjust the level of the signal out-

put to the external effects processor so

that the sound will not be distorted at the

input of the external effects processor.

4 Use the control of the ST SUB channel to

which the processed signal is input from

the external effects processor to adjust

the level of the effect sound.

Note: The MONI controls are not affected by

the level settings of each channel. This allows

you to create a mix that is independent of the

main speakers.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments