Yamaha TSX-W80 Owner's Manual download pdf (Page 14)

TROUBLESHOOTING

12 En

iPod™

Problem Cause Solution

The iPod does not charge up.

The iPod connecting to the transmitter is

set in the charging cradle improperly.

Remove the iPod connecting to the

transmitter from the unit, then set it in the

charging cradle again (☞ P. 2).

No sound

The iPod is not connected to the

transmitter firmly.

Connect the iPod firmly.

Earphones are connected. Remove the earphones.

Distance between the unit and the iPod is

too far.

Move the transmitter closer to the unit.

The battery of the iPod is low. Charge the iPod.

The iPod software version has not been

updated.

Download the latest iTunes software to

update the iPod software version to the

latest.

The iPod is in the process of connecting

with the unit.

Please wait for a while.

The unit and transmitter are not

connected since they are set to different

groups.

Set both the unit and transmitter to the same

group (☞ P. 7).

The unit is connected to another unit. Select a different group by changing the

group setting of the unit and transmitter

(☞ P. 7).

Cannot change the volume

by changing the volume of

the iPod.

– The iPod is not supported by this unit.

– The iPod is not connected correctly.

– The iPod software version is out of

date.

– The transmitter is connected to several

units.

– Use the supported iPod.

– Connect the iPod firmly.

– Update the iPod software version to the

latest.

If the problem cannot be solved, even the

latest software, reset the iPod.

– Change the group setting (☞ P. 7).

The iPod display does not

change by pressing the

remote control volume keys.

Suddenly the speaker

produces sound even though

an iPod is not connected.

The unit is connected to another

transmitter.

Change the group setting (☞ P. 7).

Transmitted sound is cut.

(Status indicator of

transmitter flashes green and

iPod indicator of SOURCE

on unit flashes.)

The signal from the transmitter is

blocked by your body or metallic objects,

etc.

Change the way of holding, the orientation,

or the position of the transmitter to avoid

your body or metallic objects blocking the

signal.

There is a device (microwave oven,

wireless LAN, cordless telephone, etc.)

outputting signals in the 2.4 GHz

frequency band nearby.

Place the unit away from these devices, or

turn them off. If the device is IEEE802.11n-

compliant, change the channel setting of the

device so as not to affect the unit.

If noise occurs at the same frequency the

transmitter is using, the unit will search

and move to another (unused) frequency,

which may cause sound to be cut.

This is not malfunction. If cut occurs

frequently, relocate the unit.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments