Yamaha TSX-140 Owner's Manual download pdf (Page 6)

NAMES OF PARTS AND THEIR FUNCTIONS

4 En

X Rear panel (Connecting antenna)

1 FM antenna terminal: Connect the supplied indoor

FM antenna.

2 GND: Connect the cable core of the Indoor FM

antenna (see below).

3 AUX: Connect an external device. (☞ P. 8)

4 USB FOR SYNC.: Connect to PC. (☞ P. 6)

5 15V : Connect supplied AC adaptor and power

cable.

6 CLOCK: Adjust the clock. (☞ P. 5)

7 ALARM TYPE: Set alarm type of IntelliAlarm

function. (☞ P. 9)

8 Indoor FM antenna (supplied)

• The antenna should be stretched out.

• If you use an outdoor antenna instead of the supplied FM

antenna, reception will be better.

• If radio reception is poor, change the height, direction, or

placement of the antenna.

Connecting antenna to the GND terminal

It is recommended to connect the antenna to the GND terminal before connecting to the FM antenna terminal.

Notes

1Remove insulation and

twist the edge of the

cord.

2Fully screw down the GND terminal.

3Wind the cord around the GND terminal. Make sure

the cord is wound inside of the ring part.

4Tighten the GND terminal

taking care not to slip the cord

off from the terminal.

Ring

1 2 3 4 5 6 7 8 9 10 11 ... 74 75

No comments

Yamaha TSX-140 Owner's Manual Page 6