Yamaha SRCP User Manual download pdf (Page 28)

5 -4

Parameters

■ Pulse train mode parameters

PRM64 Input type

Input range Default value Unit

0 to 3 0 –

Switches the mode and selects the input type for pulse train mode.

Setting value Description

Normal mode

Phase A / phase B (pulse train mode)

Pulse train / code input (pulse train mode)

CW / CCW input (pulse train mode)

* For information on each input form, refer to "signal description" in "3-2 I/O specifi-

cations and wiring".

PRM65 Input pulse evaluation

Input range Default value Unit

1 to 4 4 –

Selects the multiplication factor when the pulse input type is "phase A / phase B".

Setting value Description

1× (multiplied by 1)

2× (multiplied by 2)

4× (multiplied by 4)

PRM66 Input pulse logic

Input range Default value Unit

0 to 1 0 –

Selects the command pulse logic.

Setting value Description

Positive logic

Negative logic

* For information on the positive and negative logic, refer to "signal description" in

"3-2 I/O specifications and wiring".

PRM67

PRM68

E-gear 1 (G1)

E-gear 2 (G2)

Input range Default value Unit

1 to 32767 1

–

Sets the movement distance (pulse rate) per 1 command pulse. Here,

• E-gear 1 is the numerator in the electronic gear ratio (=G1/G2), while E-gear 2 is the

denominator.

• Make sure the setting is within a range of 1/20

(G1/G2) 100.

* See "4-4 Electronic gear function" for information on how to set the electronic gear.

PRM69 INH input

Input range Default value Unit

0 to 1 1 –

Enables/disables the INH input.

Setting value Description

Enable

Disable

5-3 Parameter description

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34

Comments to this Manuals

No comments

Yamaha SRCP User Manual Page 28

Comments to this Manuals

Related products and manuals for Unknown Yamaha SRCP