Yamaha SY35 Specifications download pdf (Page 26)

ELEMENT TONE

21

+2 Broader change between medium and hard

velocity.

+3 Smooth change all the way from soft to hard

velocity.

+4 Large change over small velocity range.

+5 Sudden change from no sound to maximum

level at about medium velocity.

“–” Settings have the same effect, but the

sound level decreases rather than increasing with

increased key velocity. A graphic display to the

right of the sensitivity value provides a visual

indication as to the type of change produced by

each setting.

AFTER TOUCH SENSITIVITY

ET>AFTER ABCD

Sense= 0 ---

Summary: Determines how the output level of the

selected element changes in response to key-

board after touch pressure changes when the

Lev (Level) parameter of the AFTER TOUCH

function in the VOICE COMMON mode is set

to “on” (see page 7).

Settings: –3 ... 0 … +3

Procedure: Use the [6] key to move the cursor to

the lower display line. Use the [–1/NO] and

[+1/YES] keys to select the desired after touch

sensitivity.

Details: Plus “+” settings produce higher output

level in response to higher after touch pressure.

Minus “–” settings produce the opposite effect:

lower level in response to higher pressure. A

setting of “0” results in no level variation.

0 No response.

+1 Narrow change between medium-high and

high pressure.

+2 Broader change between medium and high

pressure.

+3 Smooth change all the way from low to high

pressure.

“–” Settings have the same effect, but the

sound level decreases rather than increasing with

increased after touch pressure. A graphic

display to the right of the sensitivity value pro-

vides a visual clue as to the type of change pro-

duced by each setting.

TONE (FM Elements B and D Only)

ET>TONE A>CD

Lev= 0 FB=0

Summary: Adjusts the tone of the selected FM

element — B or D.

Settings: Lev (Level): 0 … 99

FB (Feedback): 0 … 7

Procedure: Use the [4] and [6] cursor keys to place

the underline cursor under the Lev or FB

parameter. Use the [–1/NO] and [+1/YES] keys

to set the level or feedback as required.

Details: The Lev parameter adjusts the modulation

level of the select FM element, so higher values

produce a brighter, sharper tone while lower

values produce a rounder, more mellow tone.

The effect of the feedback parameter varies

from element to element, but in general higher

values make the sound more brassy or noisy,

while lower values make the sound smoother.

1 ... 25 26 27 ... 83

Comments to this Manuals

No comments