Yamaha SY35 Specifications download pdf (Page 17)

VOICE VECTOR

Details: Step 1 is the first step recorded and step 50

is the last. Experience will give you a feel for

relating specific points in a dynamic vector to

the corresponding steps.

l X-axis & Y-axis

VV L.ED A B C D

1 X 0 Y 0 End

Summary: These parameters define the position of

the currently selected step on the X and Y axes

of the level vector control range.

Settings: –31 … 0 … +31

Procedure: After selecting the step to be recorded

as described in the previous function, use the [4]

and [6] cursor keys to place the underline

cursor under the X or Y parameter. Use the

[–1/NO] and [+1/YES] keys to set the value as

required.

Details: On the X (D-C) axis, a setting of –31 places

the step as far as possible toward the D element

while a setting of +31 places it as far as possible

toward the C element. The Y (A-B) axis values

work in the same way: a setting of

–31 places the step as far as possible toward the

B element while a setting of +31 places it as far

as possible toward the A element. In both axes a

setting of 0 places the step at center position.

+31

–31

+31–31

X axis

Y axis

l Time

VV L.ED A B C D

1 X 0 Y 0 End

Summary: Multiplies the vector rate setting of the

current level vector step only. Also allows vec-

tors to be looped or ended at the current step.

Settings: 1 … 254, Rep, End

Procedure: Use the [4] and [6] cursor keys to place

the underline cursor under the rightmost value

on the lower display line (Time). Use the

[–1/NO] and [+1/YES] keys to select the re-

quired time value, repeat, or end.

Details: Time values multiply the vector rate setting

for the current step. If the vector rate parameter

is set to 30ms, for example, setting the time

parameter to 2 results in a step length of 60ms,

setting it to 3 results in a step length of 90ms,

and so on. Since the maximum time value is

254, extremely long steps can be created.

If you select the “End” setting, the vector will

end at the current step.

The “Rep” setting causes the vector to loop

back to the first step from the current step, re-

peating continuously.

1 ... 16 17 18 ... 83

Comments to this Manuals

No comments

Yamaha SY35 Specifications Page 17

Comments to this Manuals

Related products and manuals for Synthesizer Yamaha SY35