Yamaha SW-3 Owner's Manual

OWNER’S MANUALMODE D’EMPLOIActive Servo Processing Subwoofer SystemEnceinte pour très basses fréquences de traitement à asservissement actifSW-3Active

1 Set the VOLUME control to minimum.2 Turn on the power supply to all the components.3 Play any source and adjust the amplifier’s volume controlto the

11EnglishThis unit’s frequency characteristics•When combined with a 4” or 5” acoustic suspension, 2 way system•When combined with a 6” or 8” acoustic

12ACTIVE SERVO TECHNOLOGYThe theory of Active Servo Technology is based upon twomajor factors, the Helmholtz resonator and negative-impedance drive.

13EnglishIf the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simplemeasures sugge

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.YAMAHA CANADA MUSIC LTD. 135 MILNER AVE.,

1 Read Instructions – All the safety and operatinginstructions should be read before the unit is operated.2 Retain Instructions – The safety and oper

3English1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!This product, when installed as indicated in theinstructions contained in this manual, meets FCC

41. To assure the finest performance, please read this manualcarefully. Keep it in a safe place for future reference.2. Install this unit in a cool,

5English•This subwoofer system employs YAMAHA Active ServoTechnology which YAMAHA developed for reproducinghigher quality super-bass sound. (Refer to

6• Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any othercomponents to wh

7EnglishIf your amplifier has two sets of speaker terminalsFor connections, cut the speaker wires as short as possible. Ifthe connections are faulty,

CONNECTING TO LINE OUTPUT (PIN JACK) TERMINALS OF THE AMPLIFIER• Leave the main speakers connected to the amplifier.• Amplifier line output terminals

9English1 POWER indicatorLights in green when the POWER switch is turned ON,and goes off when turned OFF.* STANDBY mode:If the AUTO POWER ON/OFF switc