Yamaha MOTIF-RACK ES Owner's Manual Page 108
- Page / 118
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Installing the Optional mLAN16E2
MOTIF-RACK XS Owner’s Manual
108
Basic Structure
Reference
Voice
Multi Utility
The Controls &
Connectors
Setting Up
Listening to
the Sound
Connections
Using a Computer
Quick Guide
Appendix
The optionally available mLAN expansion board (mLAN16E2) can be installed to the MOTIF-RACK XS. By installing an mLAN16E2
board, you can upgrade your MOTIF-RACK XS for convenient and easy connection to an IEEE1394-compatible computer.
Installation Precautions
Before installing the optional hardware, make sure you have a
Philips screwdriver and ample space to work.
•
Before beginning installation, switch off the power to the instrument and
connected peripherals, and unplug them from the power outlet. Installation or
removal of any devices should be started ONLY after the instrument (and the
optional hardware) returns to normal room temperature. Then remove all
cables connecting the instrument to other devices. (Leaving the power cord
connected while working can result in electric shock. Leaving other cables
connected can interfere with work.)
•
Be careful not to drop any screws inside the instrument during installation.
(This can be prevented by keeping the optional units and cover away from
the instrument while attaching). If this does happen, be sure to remove the
screw(s) from inside the unit before turning the power on. Loose screws
inside the instrument can cause improper operation or serious damage. If
you are unable to retrieve a dropped screw, consult your Yamaha dealer for
advice.
•
Install the optional units carefully as described in the procedure below.
Improper installation can cause shorts which may result in irreparable
damage and pose a fire hazard.
•
Do not disassemble, modify, or apply excessive force to board areas and
connectors on optional units. Bending or tampering with boards and
connectors may lead to electric shock, fire, or equipment failures.
•
It is recommended that you wear gloves to protect your hands from metallic
projections on optional units and other components. Touching leads or
connectors with bare hands may cause finger cuts, and may also result in
poor electrical contact or electrostatic damage.
•
Be careful of static electricity. Static electricity discharge can damage the IC
chips on the mLAN16E2. Before you handle the optional mLAN16E2, to
reduce the possibility of static electricity, touch unpainted metal parts or a
ground wire on the devices that are grounded.
•
Handle the optional units with care. Dropping or subjecting them to any kind
of shock may cause damage or result in a malfunction.
•
Do not touch the exposed metal parts in the circuit board. Touching these
parts may result in a faulty contact.
•
Be careful not to misplace any of the screws.
•
Do not use any screws other than what are installed on the instrument. Use
of incorrect screws can cause damage.
Installing the mLAN16E2
1.
Turn the power of the MOTIF-RACK XS off, and
disconnect the AC power adaptor.
Also, make sure to disconnect the MOTIF-RACK XS from
any connected external devices.
2.
Remove the cover for the mLAN16E2 from the rear
panel.
With the rear panel of this tone generator facing you,
remove the two screws from the cover.
IMPORTANT
Keep the removed screws in a safe place. They will be used
when installing the mLAN16E2. Be careful not to misplace
them. Keep the cover and fixing screws in a safe place for
future use.
After removing the cover, you will see the metal fittings at
the bottom of the opening. To avoid cutting or scraping
your fingers, be careful not to touch them when installing
the mLAN16E2.
3.
Insert the mLAN16E2 along the guide rails.
Push the mLAN16E2 all the way into the slot so that the
terminal at the end of the mLAN16E2 is correctly inserted
into the terminal inside the slot.
4.
Replace the cover with the two screws you removed
in step 2 above.
Malfunctions or incorrect operation may occur if the
mLAN16E2 is not properly fastened.
Installing the Optional mLAN16E2
WARNING
CAUTION
CAUTION
Guide rails
CAUTION
- OWNER’S MANUAL 1
- PLEASE KEEP THIS MANUAL 2
- SPECIAL MESSAGE SECTION 2
- FCC INFORMATION (U.S.A.) 3
- PRECAUTIONS 4
- Backing up the external media 5
- Introduction 6
- Accessories 6
- About the Accessory Disk 6
- Main Features 7
- How to Use the Manual 8
- Contents 9
- The Control & Connectors 10
- Front Panel 11
- Rear Panel 12
- Setting Up 13
- Tur ning the Power On/Off 14
- Listening to the Sound 15
- Audition Phrase Playback 16
- Connections 17
- Using a MIDI terminal 18
- Using an mLAN terminal 18
- MIDI OUT terminal 21
- MIDI IN terminal 21
- MOTIF-RACK XS 21
- Using a Computer 22
- RACK XS Editor 23
- What you can do by using 24
- Studio Connections 24
- Quick Guide 25
- Voice Mode 27
- M] buttons to select 28
- Using Knobs 1 – 5 29
- Functions of Knobs 1 – 5 30
- The E Indicator 31
- L]/[M] buttons 32
- <]/[>] buttons 33
- Multi Mode 35
- M] button 37
- <]/[>] 38
- Using the Arpeggio Function 40
- Arpeggio structure 41
- Arpeggio types 41
- Change messages 42
- Control Number 45
- Transmitting and saving data 47
- Resetting the User 48
- Memory to the Initial 48
- Factory Settings 48
- Basic Structure 49
- Tone Generator Block 50
- Tone Generator block in the 52
- Multi mode 52
- Audio Input Block 53
- Arpeggio Block 53
- Arpeggio Type Name 54
- Arpeggio related settings 54
- Tips for Arpeggio playback 56
- Controller Block 57
- Effect Block 57
- Element or Drum Key 58
- DYNAMIC RING 60
- MODULATOR 60
- Effect Parameters 61
- Reference 64
- Play Mode 65
- Utility mode 66
- LFO (Common LFO) 69
- 3 Band EQ 71
- Control 71
- Element Edit 73
- PEG (Pitch EG) 74
- Filter Type 76
- Center Key = C3 77
- Filter Scale 78
- AMP Level/Pan 78
- AEG (Amplitude EG) 80
- AMP Scale (Amplitude Scale) 81
- Drum Voice Edit 83
- Key Edit 84
- E. Dst (Electric Distortion) 87
- SaxWW (Sax / Woodwind) 87
- SyCmp (Synth Comp) 87
- Filter Type List 88
- Output Select List 90
- Part Edit 94
- (Velocity Sensitivity Offset) 95
- Actual resulting velocity 95
- When Depth (above) 95
- General 98
- Quick Setup dialog 101
- Tuning Offset) 102
- Voice MEQ 103
- Fctry Set (Factory Set) 103
- Appendix 104
- About MIDI 105
- Channel Mode Messages 106
- MOTIF-RACK XS Owner’s Manual 107
- 1 F7 (Hexadecimal) 107
- Troubleshooting 109
- Specifications 112
- SOFTWARE LICENSE AGREEMENT 113
- ....................68 115
- ......... 95 116
Related products and manuals for Software Yamaha MOTIF-RACK ES
Software Yamaha mLAN Patchbay Owner's Manual
(17 pages)
(17 pages)
(8 pages)
Software Yamaha SPX2000 User Manual
(2 pages)
(2 pages)
Software Yamaha S90 User Manual
(6 pages)
(6 pages)
Software Yamaha MOTIF ES8 User Manual
(11 pages)
(11 pages)
Software Yamaha SPX2000 User Manual
(108 pages)
(108 pages)
Software Yamaha v4 Manual
(324 pages)
(324 pages)
Software Yamaha QL5 Manual
(311 pages)
(311 pages)
Software Yamaha MOX6 Installation Guide
(6 pages)
(6 pages)
Software Yamaha QL5 Manual
(294 pages)
(294 pages)
Software Yamaha CL5 Manual
(302 pages)
(302 pages)
Software Yamaha MOXF8 Owner's Manual
(57 pages)
(57 pages)
Software Yamaha Amp Editor Owner's Manual
(211 pages)
(211 pages)
Software Yamaha CL5/CL3/CL1 V1.5 User Manual
(277 pages)
(277 pages)
Software Yamaha V4.0 Owner's Manual
(526 pages)
(526 pages)
Software Yamaha V3 Owner's Manual
(83 pages)
(83 pages)
© 2020, manymanuals.com. All rights reserved. | 0.160 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals