Yamaha SR230 2004 Service Manual download pdf (Page 214)

100

101

JET PUMP

JET

PUMP

6-6

JET PUMP CLEAN-OUT PORTS

EXPLODED DIAGRAM

REMOVAL AND INSTALLATION CHART

242

Step Procedure / Part Name Qty (ea.) Service Points

JET PUMP CLEAN-OUT Follow the “Step” order for removal.

TRAY REMOVAL

1 Inspection Cover 2

2 Clamp, Upper 2 Access top hose clamps through inner inspection holes,

loosen both top clamps to remove Clean-out Tray.

Clamp screw heads must be on forward (bow side) of

clean-out Hose and face center of boat (See A).

3 Screw #8 4

4 Rubber Cushion 4

5 Screw #10 14

6 Clean-out Tray 1 Apply silicone sealant to outside of clean-out port

flanges.

7 Hatch Interlock Switch 2 Set height a = 14mm (0.55”). Apply one (1) drop of

removable thread lock (LT242) to threads.

8 Clamp, lower 2 Do not need to remove unless replacing clean-out hose.

9 Hose, clean-out 2 If hose is removed, apply silicone sealant to inside of

hose at bottom, remove sealant from Cap locking

grooves in jet pump clean-out port.

10 Packing 1

11 Drain Hose 1

12 Drain Hose Clamp 1 Lift Clean-out Tray to loosen drain hose clamp and

remove drain hose.

13 Cap 2 Leave Caps in place unless jet pump clean out is

required.

NOTE: Follow Cap removal and installation instructions in JET PUMP UNIT INSPECTION,” Chapter 3.



1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 353 354

Comments to this Manuals

No comments

Yamaha SR230 2004 Service Manual Page 214

Comments to this Manuals

Related products and manuals for Scrubber Yamaha SR230 2004