Yamaha RX-V793 Owner's Manual download pdf (Page 46)

Tape deck keys

Controls tape deck.

(The A/B/C switch (

F) should be set to the “A” position.)

* DIR A, B and A/B are applicable only to double

cassette tape deck.

* For a single cassette deck with automatic reverse

function, pressing DIR A will reverse the direction of

tape running.

2 CD/LD/DVD player keys

Controls compact disc player, LD player or DVD player.

(To control compact disc player, set the A/B/C switch (

F) to

the “A” position. To control LD player or DVD player, set the

A/B/C switch (

F) to the “C” position.)

* DISC is applicable only to compact disc changer.

* STOP is applicable only to LD player or DVD player.

3 Tuner keys

Controls tuner.

(The A/B/C switch (

F) should be set to the “A” position.)

+: Selects higher preset station number.

–: Selects lower preset station number.

A/B/C/D/E: Selects the group (A – E) of preset station

numbers.

4 DSP program selector keys

Selects a DSP program when the built-in digital sound field

processor (including the Dolby Pro Logic Surround decoder

and the Dolby Digital (AC-3) decoder) is on.

5 TEST key

Used for speaker balance adjustment. (For details, refer to

page 24–25.)

6 TIME/LEVEL·SET MENU switch

Set to the TIME/LEVEL position when you will make an

adjustment on delay time, center speaker output level, rear

speaker output level or subwoofer level. Set to the SET MENU

position when you will make an adjustment or setting change

on a function in the SET MENU mode.

7 SLEEP timer key

This key is used to turn the built-in SLEEP timer on and off,

and to set the SLEEP time. (For details, refer to page 42.)

8 SYSTEM POWER ON and STANDBY keys

Pressing the SYSTEM POWER ON key turns the power to this

unit on and pressing the STANDBY key turns this unit into the

standby mode.

9 RESET button

This button is inside the battery compartment.

Press this button to “reset” the internal microcomputer which

controls remote control operations. Microcomputer “reset” is

necessary when the remote control freezes.

* Pressing the RESET button will not erase learned

functions.

0 MASTER VOLUME (up) and (down) keys

Turns the volume level up and down.

A MUTE key

When pressed, this key mutes the volume level. To resume the

original volume level, press this key again.

While muting, the indicator on the VOLUME control flashes

continuously.

B / and –/+ keys

(up) and (down) keys change items (or functions) in the

mode selected by the TIME/LEVEL·SET MENU switch. – and

+ keys make an adjustment or setting change on the item (or

function) selected by the or key.

C EFFECT ON/OFF key

Switches on/off the digital sound field processor (including the

Dolby Pro Logic Surround decoder and the Dolby Digital (AC-

3) decoder).

D Input selector keys

Selects input source.

E A/B/C indicators

The position (A, B or C) selected by the A/B/C switch is shown

in red.

F A/B/C switch

This switch must be used only when the lid of the remote

control transmitter is open. (This switch will not function when

the lid is closed.)

Normally, set this switch to the “A” position. When controlling a

Yamaha LD player or DVD player by using the CD/LD/DVD

player keys (

2), set this switch to the “C” position.

G TRANSMIT/LEARN indicator

Lights up when the remote control transmitter is transmitting

infrared signals (when a command key is pressed).

Note

When using the keys to control Yamaha components,

identify them with your component’s keys. If these keys

are identical, their functions will be the same. For each key

function, refer to the corresponding instruction in your

component’s manual.

RESET button

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 58 59

Comments to this Manuals

No comments

Yamaha RX-V793 Owner's Manual Page 46

Comments to this Manuals

Related products and manuals for Receiver Yamaha RX-V793