Yamaha RX-V793 Owner's Manual Page 33

  • Download
  • Add to my manuals
  • Print
  • Page
    / 59
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 32
Selecting the SPEAKER system
Because one or two speaker systems (as main speakers) can
be connected to this unit, the SPEAKERS switches allow you
to select speaker system A or B, or both at once.
Adjusting the BALANCE control
Adjust the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused by
speaker location or listening room conditions.
Note
This control is effective only for the sound from the main
speakers.
Adjusting the BASS and TREBLE
controls
BASS : Turn this clockwise to increase (or counter-
clockwise to decrease) the low frequency
response.
TREBLE : Turn this clockwise to increase (or counter-
clockwise to decrease) the high frequency
response.
Note
These controls are effective only for the sound from the main
speakers.
Using the BASS EXTENSION switch
You can boost bass frequency response by setting this switch
to the “ON” position. This switch is effective only on the sound
from the main speakers.
Using the TONE BYPASS switch
Press this switch inward (ON) if you want to listen to pure
source sound. The input signal does not pass through the tone
(BASS and TREBLE) control circuitry so that it is unaffected by
the tone control circuitry. Press this switch to release it outward
(OFF) to use the tone control circuitry.
31
English
SPEAKERS
A
ON
OFF
B
BALANCE
55
4
3
2
l
0
l
2
3
4
LR
BASS TREBLE
55
4
3
2
l
0
l
2
3
4
55
4
3
2
l
0
l
2
3
4
ON
OFF
BASS
EXTENSION
TONE
BYPASS
ON
OFF
BASS
EXTENSION
TONE
BYPASS
Page view 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 58 59

Comments to this Manuals

No comments