Yamaha YSP-500 Owner's Manual Page 62

  • Download
  • Add to my manuals
  • Print
  • Page
    / 98
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 61
60 En
MANUAL SETUP
BEAM TRAVEL LENGTH (Beam travel length)
A certain amount of delay must be applied to the sound
from each channel so that all sounds can arrive at the
listening position at the same time. This menu sets the
distance that sound beams travel after being output and
reflected off the wall until they arrive at the listening
position and adjusts the delay applied to the respective
channel.
The lines in the illustration below indicate the distance.
Choices: 0.3 m to 24.0 m (1.0 ft to 80.0 ft)
Front L adjusts the distance the front left channel
sound beams travel.
Front R adjusts the distance the front right channel
sound beams travel.
Center adjusts the distance the center channel sound
beams travel.
Surround L adjusts the distance the surround left
channel sound beams travel.
Surround R adjusts the distance the surround right
channel sound beams travel.
y
We recommend that you use the setting optimized by AUTO
SETUP (see page 31). Adjust this parameter only when you
changed HORIZONTAL ANGLE (see page 59).
FOCAL LENGTH (Focal length)
Use to set the distance from the front of this unit to the
focal point of output for each channel to achieve an
expansive feeling for each channel.
The focal points except for the center channel should be
set near the reflection points on the walls. The shorter the
distance, the larger the expansion.
Choices: –1.0 m to +13.0 m (–3.5 ft to +43.5 ft)
Adjust toward – (minus) to move the focus outward and
adjust toward + (plus) to move the focus toward the
normal position.
Front L adjusts the focal length for the front left sound
beams.
Front R adjusts the focal length for the front right
sound beams.
Center adjusts the focal length for the center sound
beams. Initial setting: –0.3 m (–1.0 ft)
Surround L adjusts the focal length for the surround
left sound beams.
Surround R adjusts the focal length for the surround
right sound beams.
y
We recommend that you use the initial setting (–0.3 m
(or –1.0 ft)) for the center channel.
5 beam
Front L;;;;;;;6.0m
Front R;;;;;;;6.0m
Center;;;;;;;;2.5m
Surround L;;;;9.1m
Surround R;;;;9.1m
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
b)BEAM TRAVEL LENGTH
p
p
.
p
p
focal length
focal point
sweet spot
Front left channel Center channel
5 beam
Front L;;;;;;+1.5m
Front R;;;;;;+1.5m
Center;;;;;;;-0.3m
Surround L;;;+2.3m
Surround R;;;+2.3m
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
c)FOCAL LENGTH
p
p
.
p
p
Page view 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 97 98

Comments to this Manuals

No comments