Yamaha PDM5520 User Manual download pdf (Page 15)

ENGLISH

(1) Make sure that the power switch of the monitor is turned off.

(2) Make sure that the power switch of the imaging device is turned off.

(3) Use a commercially available cable and connector to connect the signal input terminal on the rear panel of this

device and the signal output terminal of the imaging device.

INSTALLATION INSTRUCTIONS (continued)

Connecting to Video Imaging Device

Read CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. and PRECAUTIONS ( to )

carefully to ensure maximum safety before proceeding to these steps:

• Choose a safe, level location to install the product.

• Install the monitor in a location with easy access to a power socket.

• Make sure that the power switch of this device is turned off.

• If video equipment with an S video output terminal is used,

connection with S video cable is recommended to provide finer

video quality. (If the S-video input terminal and the video input

terminal of AV3 connect to the monitor at the same time, S-video

input would govern.)

• If the OUTPUT (MONITOR) terminal is connected to an external

monitor with a 75 Ohm terminal, it is possible to view the same

image as on the monitor. But it is possible to monitor only the

composite video signal from AV1, AV2, AV3 or AV4 input that is

displayed on the screen at the time.

• If the adaptor (included) is applied to AV4 input as shown in the

drawing, it is impossible to receive RGB signal.

[An example of connecting video imaging device]

DVI-STB and RGB component setup

To Subwoofer

To component video equipment

Please use connection cable suitable

for the terminal form of video

equipment.

Terminal

Signal

AV1

AV2

AV3

AV4

RGB1

RGB2

CVBS

‡

S-video

‡

Component

‡

RGB

‡

STB

‡

RGB

‡

Component

‡

Remarks

Refer to Setup Menu.

RCA/SCART DVI D-sub

Applicable video signals for each input terminal (See PRODUCT SPECIFICATIONS for details. )

Monitor rear panel

Speaker (R)

Speaker (L)

Power

cord

スピーカー端子

(6Ω12W)

スピーカー端子

(6Ω12W)

Use if the

video

equipment

has an

S-video

input terminal.

To S video output

terminal

To audio output

terminals

To audio output

terminals

To component

output terminals

To component

output terminals

To component

input terminals

To component

input terminals

To composite

input terminal

To audio output

terminals

To audio input

terminals

20 18 16 14 12 10 8 6 4 2

19 17

15 13 11 9

VCR

DVD player Set-Top Box

Video disc player

Adaptor

To composite

output terminal

S-video/Composite video

Do not connect both

plugs at the same time.

Use either of them.

(‡ : available)

SUB WOOFER

012_PDM-5520_U_E 12/13/04, 9:23 AM13

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 49 50

Comments to this Manuals

No comments

Yamaha PDM5520 User Manual Page 15

Comments to this Manuals

Related products and manuals for Plasma TVs Yamaha PDM5520