Yamaha DTX Owner's Manual Page 64

  • Download
  • Add to my manuals
  • Print
  • Page
    / 174
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 63
60
Feature Reference Drum Kit Voice Edit Mode
17 BK Ch= (transmit bank select)
This selects the bank (MIDI Control Change) to
be transmitted when the drum kit is changed.
You can set the bank individually to channels 1
through 16. By switching the DTX drum kit,
you can change the bank of an external tone
generator voice. By using this with the MIDI
Program Change function mentioned above,
you can effectively choose from many sounds
available in the tone generator. This can be set
for each drum kit.
! Move the cursor to the Bank Select
Transmission Channel focus area and rotate
the Data Scroll Wheel or use the +1/YES and
-1/NO buttons to select the transmission
channel.
" Move the cursor to Bank Select MSB focus
area and rotate the Data Scroll Wheel or use
the +1/YES and -1/NO buttons to select the
MSB.
# Move the cursor to Bank Select LSB focus
area and rotate the Data Scroll Wheel or use
the +1/YES and -1/NO buttons to select the
LSB.
$ Repeat steps !, ", and # to set the bank
select for each of the 16 channels.
MISC.
SNARE
KICK
CYMBAL
M 0L 0
BK Ch= 1
Bank select LSB
Bank select MSB
Bank select transmission channel
Settings:
Bank Select Transmission Channel: 1 to 16
Bank Select MSB: 0 to 127
Bank Select LSB: 0 to 127
18 CC Ch= (transmit control change: volume)
This sets the volume of the MIDI control change
sent when the drum kit is switched. It is
possible to set the volume value for each of the
channels 1 to 16. For example, by switching
the drum kit of the DTX, you can set the
volume of a voice of an external synthesizer to a
specific value. These parameters can be set for
each drum kit.
! Move the cursor to the Control Change
Transmission Channel and select the
Transmission channel using the Data Scroll
Wheel or the +1/YES and -1/NO buttons.
" Move the cursor to the Volume focus area
and set the value using the Data Scroll Wheel
or the +1/YES and -1/NO buttons.
# Repeat steps ! and " and set the volume
for each of the 16 channels.
MISC.
SNARE
KICK
CYMBAL
CC Ch= 1
Vol= off
Volume
Control change transmission channel
Settings:
Control change Send channel: 1 to 16
Volume: off, 0 to 127
Page view 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 173 174

Comments to this Manuals

No comments