Yamaha DGX-650 Owner's Manual download pdf (Page 12)

Keyboard Stand Assembly

DGX-650 Owner’s Manual

Setting Up

Attach the back board.

Attach the back board, using the screws t. Check

the back-to-front orientation for the side boards.

Make sure the non-colored surface is facing down.

Put the keyboard on the stand.

Check the back-to-front orientation for stand, and

carefully place the keyboard on the side boards.

Slowly move the keyboard so that the holes on the

bottom of the keyboard are properly aligned with

the holes on the angle brackets.

t 6 x 30 mm roundhead screws

At least

10 cm

At least

10 cm

Be sure to place your hands at

least 10 cm from either end of the

keyboard when positioning it.

• Be careful not to drop the back board or touch the

sharp metal fittings.

• If you have purchased an optional pedal unit, attach the

pedal unit before proceeding to the next step. Refer to the

instructions provided with your pedal unit.

• Be careful not to drop the keyboard or to get your fin-

gers caught between the keyboard and the stand

parts.

• Do not hold the keyboard in any position other than

the position shown in the illustration.

CAUTION

NOTE

CAUTION

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 85 86

No comments

Yamaha DGX-650 Owner's Manual Page 12