Yamaha YST-RSW300 Manual download pdf (Page 15)

13 En

English

This function automatically switches the unit between standby and power-on modes.

- The subwoofer automatically places itself in standby mode if it does not receive an input signal for 7 or 8 minutes (the

status indicator lights red).

- When the subwoofer detects a bass signal input of below 200 Hz, it automatically places itself in power-on mode (the

status indicator lights green).

1 Set the subwoofer to standby.

2 Change the AUTO STANDBY setting.

- LOW: Normally select this position to activate this function.

- HIGH: If this function does not operate with AUTO STANDBY switch set to LOW, select this position so that the

subwoofer detects input signals with a lower level and switches the power on automatically.

- OFF: Select this position to deactivate this function, for example, when the subwoofer switches the power on

unexpectedly by sensing noises from other appliances.

• This function does not operate when the POWER switch is set to the OFF position, or when you manually set the

subwoofer to the standby mode by pressing the STANDBY/ON switch.

• Noise received from other appliances may extend the time period before the subwoofer places itself in the standby

mode to more than 8 minutes.

AUTOMATIC POWER-SWITCHING FUNCTION

Changing the AUTO STANDBY setting

Notes

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 127 128

No comments

Yamaha YST-RSW300 Manual Page 15