COOL
THERMOSTAT AND RADIATOR
5-9
INSPECTION
1. Inspect:
• The radiator core
Obstruction
Eliminate this with com-
pressed air, blowing from the rear of the
radiator.
Squashed fins
repair / replace
2. Inspect:
• The inlet hose
Cracks / damage
Replace
• Output sleeve
Cracks / Damage
Replace
3. Measure:
• The opening pressure of the radiator cap
Measurement steps:
• Connect the tester of the cooling sys-
tem and the adapter to the radiator cap
.
• Apply the specified pressure for ten
seconds and make sure that this does not
drop.
4. Inspect:
• The thermostat
See the section on “DISMANTLING THE
ENGINE” in CHAPTER 4 CYLINDER
HEAD AND CYLINDER
The valve does not open
replace
Radiator cap opening pressure:
0.75 ~ 1.05 kg/cm
2
Cooling system tester:
90890 - 01325
Adapter:
90890 - 01352
Comments to this Manuals