Yamaha BANSHEE Service Manual download pdf (Page 3)

INSTALLATION INSTRUCTIONS 3

Figure 4 Connecting the MSD Kill Switch (White Wire).

Figure 5 Mounting the NiCad Battery.

3. Plug these two connectors together and

secure them to the frame.

4. Using the hardware from the stock coil,

mount the MSD Coil assembly to the

factory coil bracket. Refer to the coil

instructions for cutting and crimping the

spark plug wires.

5. Route the Enhancer’s Orange and Brown

wire assembly to the coil and connect

them to the MSD coil.

6. Find the solid Black wire on the MSD

Enhancer Ignition that has a ring lug

attached. This will be the ignition ground

and needs to be directly attached to the

engine. Clean off any paint and attach securely to the engine.

7. The White wire controls the kill function of the ignition system. It can be connected one of two

ways:

A. If you do not want the Throttle OverRide System (TORS) to be functional then disconnect

the Black/White wire from the ignition kill switch on he handle bar and attach the White wire to

the Black/White wire that goes to the ignition kill switch.

B. If you want to retain the TORS unit splice the White wire from the Enhancer into the Black/

White wirE (Figure 3).

Note: The Stock Key switch will no longer function

for ignition kill.

8. The Light Blue wire controls the “Holeshot” feature

of the Enhancer Ignition System. When this wire

is connected to ground the ignition will go into a

low rpm rev limit. Typically this wire is connected

to a clutch lever actuated switch (Figure 3).

9. The NiCad battery mounts between the gas tank

and the plastic body. Mount the battery to the

mounting plate and slide the assembly between

the plastic and the tank. Bolt both pieces to the

tank with the original hardware (Figure 4).

10. Route the Red and Black wire from the Enhancer

ignition to the battery. Make sure they are clear of any exhaust components and secure them to

the frame.

Note: It is recommended to disconnect the battery after every ride to preserve the

battery life.

MSD POWERSPORTS • 1490 HENRY BRENNAN DR., EL PASO, TEXAS 79936 • (915) 858-3365 • FAX (915) 858-3496

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Yamaha BANSHEE Service Manual Page 3

Comments to this Manuals

Related products and manuals for Motorcycles Yamaha BANSHEE