Yamaha 2003 Royal Star Venture Owner's Manual Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 145
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
INSTRUMENT AND CONTROL FUNCTIONS
3-6
3
To activate and set the cruise control
system:
1. Push the CRUISE switch to the
left. The ON indicator light will
come on.
2. Press the SET/DEC (set/decel-
erate) side of the cruise control
switch to activate the cruise con-
trol system. The SET indicator
light comes on.
3. Set the desired traveling speed as
follows. Press the RES/ACC (re-
sume/accelerate) side of the
cruise control switch to increase
the set speed or the SET/DEC
side to decrease the speed.
NOTE:
_
Pressing the cruise control switch once
will change the speed in increments of
1 mi/h (1.6 km/h). Holding the cruise
control switch down will increase or de-
crease the speed continuously until the
switch is released.
_
The traveling speed can be set to a
maximum of 80 mi/h (130 km/h) and a
minimum of 30 mi/h (50 km/h).
When the cruise control system is acti-
vated and the throttle grip is turned to
increase the speed by up to 5 mi/h
(8 km/h), the cruise control system will
return to the set speed after the throttle
grip is released. However, if the speed
is increased by more than 5 mi/h
(8 km/h), the cruise control system will
be deactivated until the traveling speed
is within 5 mi/h (8 km/h) of the set
speed.
Deactivating the cruise control
system
Applying the front or rear brake or dis-
engaging the clutch will automatically
deactivate the cruise control system.
Push the CANCEL switch to manually
deactivate cruise control.
NOTE:
_
When the cruise control system is
deactivated, the RES (resume)
indicator light will come on.
Traveling speed decreases as
soon as the cruise control system
is deactivated; unless the throttle
grip is turned.
_
1. Cruise control switch
2. CANCEL switch
1. SET indicator light
2. RES indicator light
3. ON indicator light
U4XY14.book Page 6 Thursday, May 30, 2002 3:40 PM
Page view 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 144 145

Comments to this Manuals

No comments