Yamaha 2003 Royal Star Venture Owner's Manual download pdf (Page 26)

INSTRUMENT AND CONTROL FUNCTIONS

3-5

3

To reset a tripmeter, select it by push-

ing the “SELECT” button, and then

push the “RESET” button. If you do not

reset the fuel reserve tripmeter manu-

ally, it will reset itself automatically and

the display will return to “TRIP 1” after

refueling and traveling 3 mi (5 km).

NOTE:

_

After resetting the fuel reserve tripme-

ter, the display will return to “TRIP 1”,

unless a different mode had been pre-

viously selected; in that case, the dis-

play automatically returns to the prior

mode.

_

Clock mode

To change the display to the clock

mode, push both the “SELECT” and

“RESET” buttons.

To change the display back to the

odometer modes, push the “SELECT”

button.

To set the clock:

1. Push both the “SELECT” and “RE-

SET” buttons for at least two sec-

onds.

2. When the hour digits start flashing,

push the “RESET” button to set

the hours.

3. Push the “SELECT” button, and

the minute digits will start flashing.

4. Push the “RESET” button to set

the minutes.

5. Push the “SELECT” button to start

the clock.

NOTE:

_

After setting the clock, be sure to push

the “SELECT” button before turning the

key to “OFF”, otherwise the clock will

not be set.

_

EAU04037

Cruise control system

This motorcycle is equipped with a

cruise control system designed to

maintain a set traveling speed.

Activating and setting the cruise

control system

The cruise control system can only be

activated when riding in 4th or 5th gear

at speeds between 30 mi/h (50 km/h)

and 80 mi/h (130 km/h).

1. “CRUISE” switch

U4XY14.book Page 5 Thursday, May 30, 2002 3:40 PM

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 144 145

Comments to this Manuals

No comments