Quick change cutterheads on Rottler boring
machines can be easily changed. The quick-change
draw bar system pulls the cutterhead into the spindle
and firmly locks it into the internal taper for chatter
free cutting. Cutterheads are available to machine
from 1.5" (38mm) to 9.0" (230mm). Different design
cutterheads are available for production thru boring,
blind hole boring, and heavy duty large diameter
boring, sleeving and counterboring. Shown here
are typical cutterheads for small diameter cylinder
boring, production boring and heavy duty, large
diameter machining.
#502-3-23 Evinrude/Johnson/Mercury
#502-3-23C 76 Deg.Yamaha
Marine Outboard Fixture
Adapts the V6/V8 fixture to accept V4/V6 Evinrude
or Johnson and V6 Mercury blocks. Rottler
Manufacturing has designed other fixtures to handle
additional special outboard applications.
V-Block Fixture
Patented 60/90 Degrees
The Rottler Universal V-Block fixture system provides a
fast and effortless method of holding blocks for boring
and sleeving operations. A simple side shift of the fixture
changes from 90° V8's to 60° V6's.
This fixture has two
modes of operation: one mode automatically aligns to
main bearing and pan rail; the adjustable mode allows
you to use the fixture to align to the original deck surface.
The same fixture can be used on Rottler Surfacing
machines.
#502-1-72F Fixture with Air Clamping and Airfloat
#502-1-72H Fixture with Manual Clamping
#502-1-95 Block Handler
Inline Fixture Adapter
This adapter allows quick mounting and leveling of
inline blocks to be bored without removing the
60°/90° V-block fixture.
#502-3-48Q
Dust Collection System
The dust collection system maintains shop
environment by removing dust particles generated
during boring operations, and also functions as a
chip guard during high-speed boring.
#504-35-11E
Block Handler
The Rottler Block Handler provides a safe and
efficient way to load, unload, and move blocks
from station to station.
#502-1-95
Mechanical Run-out Indicator
Mechanical Run-out Indicator for checking concentricity.
Also used for precise positioning of the cutterhead and
alignment with the cylinder bore and deck.
#502-9-9A
#7243 Diesel V-Block Assembly
Designed by Rottler for accurate machining of diesel
V-blocks such as the 71 or 92 Series Detroit. Similar
fixturing can also be used with Rottler surfacing
machines.
Diesel V-Block Assembly
Fixtures
Accessories
Cutterheads
(30 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals