Yamaha SX200C Owner's Manual Page 64

  • Download
  • Add to my manuals
  • Print
  • Page
    / 118
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 63
E
4-1
EMU00318*
SPECIFICATIONS
Recommended fuel
P.O.N.
Fuel tank capacity L (US gal, Imp gal)
Recommended engine oil
Lubrication Fuel : Oil
Engine oil capacity (engine oil tank) L (US qt, Imp qt)
(remote oil tank) L (US qt, Imp qt)
Recommended gear oil
Gear oil capacity cm
3
(US oz, Imp oz)
Spark plug N•m (kgf•m, lb•ft)
Propeller nut N•m (kgf•m, lb•ft)
TIGHTENING TORQUE
25 (2.5, 18)
55 (5.5, 40)
Model
Unit SX150TRC
Item
DIMENSIONS
PERFORMANCE
Overall Length mm (in.)
Overall Width mm (in.)
Overall Height X mm (in.)
Transom height X mm (in.)
Weight* X kg (lb.)
823 (32.4)
577 (22.7)
1,742 (68.6)
642 (25.3)
206 (454)
Full throttle operating range r/min
Maximum output kW (HP) @ r/min
Idling speed (Neutral) r/min
4,500 ~ 5,500
110.3 (150.0) @ 5,000
700 ~ 760
ENGINE
Type
Displacement cm
3
(cu.in.)
Bore
× stroke mm (in.)
Ignition system
Spark plug NGK
Spark plug gap mm (in.)
Control system
Starting system
Battery
Min. cold cranking amps (CCA/SAE) amps at -18°C (-0.4°F)
Min. marine cranking amps (MCA/ABYC)
amps at 0°C (32°F)
Min. reserve capacity (RC/SAE) minutes
Alternator output V-A (W)
Starting carburetion system
2-stroke, 90°V6
2,596 (158.4)
90.0 × 68.0 (3.54 × 2.68)
C.D.I system
BR7HS-10
0.9 ~ 1.0 (0.035 ~ 0.039)
Remote control
Electric start
380
502
124
12-35
Electronic Fuel Injection
DRIVE UNIT
Gear positions
Gear ratio
Trim/tilt system
Propeller mark
Forward-Neutral-Reverse
1.86 (26 / 14)
Power trim & tilt
M
FUEL AND OIL
Regular unleaded gasoline
(Minimum 86)
Yamalube 2-M outboard oil or another
outboard motor manufacturer’s factory-
brand oil with TC-W3 rating
oil injection system
0.9 (0.95, 0.79)
10.5 (11.1, 9.24), / 18.0 (19.1, 15.9)
Hypoid gear oil (SAE90)
980
* Listed weight does not include propeller.
67K-9-15-4 2/28/03 9:15 Page 2
Page view 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 117 118

Comments to this Manuals

No comments