Yamaha CVP-206 Owner's Manual download pdf (Page 150)

Using Your Clavinova with Other Devices

CVP-206/204

150

Using the USB terminal

Connect the USB terminal of a computer to the USB

terminal of the CVP-206/204 using a USB cable. Make

sure to use a standard USB cable with the USB logo.

Using the MIDI terminals

When using a MIDI interface device installed in the

personal computer, connect the MIDI terminals of the

personal computer and the CVP-206/204 with standard

MIDI cables.

• When the computer has a MIDI interface installed,

connect the MIDI OUT terminal of the personal

computer to the MIDI IN terminal.

• When using a MIDI interface with a Macintosh series

computer, connect the RS-422 terminal of the

computer (modem or printer terminal) to the MIDI

interface, then connect the MIDI OUT terminal on the

MIDI interface to the MIDI IN terminal of the CVP-

206/204, as shown in the diagram below.

• When using a Macintosh series computer, set the

MIDI interface clock setting in the application

software to match the setting of the MIDI interface

you are using. For details, refer to the owner’s

manual for the particular software you are using.

About the USB driver

You must install the speciﬁed USB driver (YAMAHA

USB MIDI Driver) to your computer before you can

transfer data between the computer and the CVP-206/

204.

You can download a copy of the YAMAHA USB MIDI

Driver free of charge from the XG Library on the

Yamaha Web site (http://www.yamaha-xg.com).

NEC

PC-9821

NEC MultiSync

USB cable

Clavinova

If you are using a USB cable to connect the Clavinova to your com-

puter, you must connect the USB cable before turning on the power

of the instrument.

Also, do not turn the power of the Clavinova on or off while any

application software that uses USB or MIDI is running.

If you turn the power of the Clavinova on/off or connect/disconnect

the USB cable in the following states, problems will occur in the

computer system, possibly causing it to “freeze” (hang up), or caus-

ing the Clavinova to stop functioning.

• While installing the driver.

• While starting or shutting down the operating system.

• While the computer is in an energy-save or sleep mode.

• When a MIDI application program is starting.

Make sure NOT to perform any of the following operations. Other-

wise, the computer may lock up or the Clavinova functions may be

disabled.

•Turning the power on/off, or connecting/disconnecting the cable

too often.

• Shifting to energy-save or sleep mode while MIDI data is being

transferred, or returning from sleep mode.

• Disconnecting/connecting the cable while the Clavinova is on.

•Turning the power of the Clavinova on/off, starting up your com-

puter, or installing the driver while a large amount of data is

being transferred.

CAUTION

• The Clavinova will begin transmission a short time after the USB

connection is made.

• When using a USB cable to connect the Clavinova to your com-

puter, make the connection directly without passing through a

USB hub.

• Depending on the state of your computer, the operating state of

the Clavinova may become unstable. Do not use your computer

in a way that causes it to enter an unstable state.

When connecting the Clavinova to a personal computer, ﬁrst turn

off the power to both the Clavinova and the computer before con-

necting any cables. After making the proper connections and set-

tings, turn on the power of the computer ﬁrst, then that of the

Clavinova.

NEC

PC-9821

NEC MultiSync

MIDI IN MIDI OUT

MIDI OUT MIDI IN

Clavinova

MIDI IN

RS422

MIDI OUT

MINI DIN

8-pin

Clavinova

1 ... 149 150 151 ... 172

Comments to this Manuals

No comments

Yamaha CVP-206 Owner's Manual Page 150

Comments to this Manuals

Related products and manuals for Digital pianos Yamaha CVP-206