Yamaha 480 Owner's Manual download pdf (Page 85)

Appendix

Assembling the Clavinova

7. Attach C.

7-1 Place on D, the stopper-wood at the bottom

edges of C, then secure the top.

7-2 Secure the upper right, left, and center parts

of C using three 4 x 14 mm thin screws.

7-3 Secure the lower part of C using four 4 x 20

mm tapping screws.

8. Connect the power cord.

8-1 For models that feature a voltage selector:

Set the voltage selector to an appropriate

voltage.

WARNING

An improper voltage setting can cause serious damage to the

instrument or result in improper operation.

8-2 Insert the plug of the power cord into the

power connector.

9. Set the adjuster.

Rotate the adjuster until the pedal box comes in

firm contact with the floor surface.

10. Attach the headphone hanger.

Use the included two screws (4 x 10 mm) to attach

the hanger as shown in the illustration.

Insert the pedal cord securely

until the metal part of the cord

plug disappears from view.

Otherwise, the pedal may not

function properly.

Voltage Selector

Before connecting the AC power cord, check the

setting of the voltage selector which is provided in

some areas. To set the selector for 110V, 127V, 220V

or 240V main voltages, use a “minus” screwdriver to

rotate the selector dial so that the correct voltage for

your region appears next to the pointer on the panel.

The voltage selector is set at 240V when the unit is

initially shipped. After the proper voltage has been

selected, connect the AC power cord to the AC IN

and an AC wall outlet. A plug adaptor may be also

provided in some areas to match the pin

configuration of the AC wall outlets in your area.

7-1

7-2

7-3

240

127

110

220

8-2

8-1

1 ... 84 85 86 ... 96

Comments to this Manuals

No comments

Yamaha 480 Owner's Manual Page 85

Comments to this Manuals

Related products and manuals for Digital pianos Yamaha 480