Yamaha EXCITER 270 Owner's Manual download pdf (Page 62)

3) Wash down the hull, helm, and both

jet drive units with fresh water.

4) Remove hull drain plug and the two

engine compartment drain plugs.

Rinse the engine compartment with

a small amount of fresh water. Be

careful not to get water on the car-

buretor or electrical components.

Allow any water in the bilge to drain

out. After the water has drained,

wipe the engine compartment and

bilge with dry rags. Reinstall all

drain plugs.

NOTE:

_________________

This boat is equipped with an electric

bilge pump that automatically removes

excess water from the bilge while you

are underway. However, some residual

water remains that must be drained by

removing the drain plug.

___________

Tighten the hull drain plug securely

before launching the Jet Boat. Clean

any foreign material, such as dirt or

sand, from the threads before

installing the drain plug.

5) Spray a rust inhibitor, such as

Ya maha Silicone Protectant and

Lubricant, on metallic parts to mini-

mize corrosion.

CAUTION:

3-21

PERATION

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 101 102

No comments

Yamaha EXCITER 270 Owner's Manual Page 62