Yamaha EXCITER 270 Owner's Manual download pdf (Page 53)

3-12

PERATION

NOTE: _________________

Before the first start-up, remove the

fuel tank filler cap to release any built-

up pressure in the tank because of fuel

expansion.

3) Attach the lanyard clip to your PFD.

Install the lanyard lock plate on the

engine stop switch by pushing the

lock plate groove over the nut

beneath the knob. Be sure the lan-

yard is not wrapped around the

steering wheel or tangled in the

controls.

1 Engine stop switch

2 Lock-plate with lanyard

NOTE: _________________

It is not possible to start the engine

with the lock-plate removed from the

engine stop switch. However, the

starter motor will turn the engine over.

4) Pull the choke knob all the way out.

NOTE: _________________

● It may be necessary to hold the

choke knob completely pulled out

when starting a very cold engine.

● After the engine has warmed up,

push the choke knob in gradually.

The choke should not be used when

the engine is warm.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 101 102

No comments

Yamaha EXCITER 270 Owner's Manual Page 53