Yamaha YSP-4300 Owner's Manual download pdf (Page 21)

21 En

PREPARATION PLAYBACK SETTINGS

TROUBLESHOOTING

APPENDIX

Initial settings

Yamaha’s proprietary yAired technology enables the wireless

connection of the center unit and subwoofer. Wireless connection

of the subwoofer allows for subwoofer installation without

concern for cables. When the transmitter (YIT-W12TX) is used,

iPods or computers can be connected wirelessly to play music

stored on these devices through this unit.

For details of YIT-W12TX, refer to “Safety and Accessory

Information” (separate booklet).

When playing content from a TV or Blu-ray disc player, the

center unit transmits audio signals that are received by the

subwoofer. When YIT-W12TX is used to play songs stored on an

iPod or computer, YIT-W12TX sends audio signals that are

received by the center unit and subwoofer.

The same group ID must be assigned to all components. By

default, the center unit, subwoofer, and YIT-W12TX are assigned

a group ID of A1. This group ID does not need to be changed.

The center unit, subwoofer, and YIT-W12TX can be assigned a

group ID from three possible sets: A1–A3, B1–B3, C1–C3.

Use set C1–C3 when playing music stored on a computer via

YIT-W12TX. For details of YIT-W12TX, refer to “Safety and

Accessory Information” (separate booklet).

In all other cases, select a group ID from set A1–A3, B1–B3, or

C1–C3 to achieve a stable wireless connection.

To prevent wireless connection of another yAired Yamaha sound

system or device installed near this unit or the YIT-W12TX,

assign a different group ID to this unit and the YIT-W12TX.

Changing the group ID

Center unit

Change the group ID from “GROUP ID” in the setup menu

(☞p. 64).

Subwoofer

Use the group ID switches on the back of the subwoofer to

change the group ID (☞p. 20).

YIT-W12TX

Use the group ID switches on the side of YIT-W12TX to change

the group ID. For details of YIT-W12TX, refer to “Safety and

Accessory Information” (separate booklet).

Visual operation of this unit

is possible by displaying its

menu screen on the TV.

Use the button for switching

between input sources on the

TV’s remote control to

select this unit.

When this unit and the TV

are connected as shown

below, select “HDMI 1”.

The menu display

The setup menu is displayed on the TV screen when the SETUP

key is pressed. When the TV is receiving HDMI signals, the

menu is superimposed over video content. Press the SETUP key a

second time to cancel setup menu display.

Establishing a wireless connection

Group IDs

Displaying the menu screen on the

TV remote control (example)

Switch

input

sources

HDMI INPUT

123

this unit

SETUP MENU

BEAM

SOUND

HDMI

yAired

DISPLAY

INFORMATION

IntelliBeam

HORIZONTAL ANGLE

BEAM TRAVEL LENGTH

FOCAL LENGTH

IMAGE LOCATION

CHANNEL OUT

The setup menu (☞p. 58) can only be displayed on a TV screen. It

cannot be shown in the front panel display.

Note

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 79 80

Comments to this Manuals

No comments

Yamaha YSP-4300 Owner's Manual Page 21

Comments to this Manuals

Related products and manuals for AV receivers Yamaha YSP-4300