Yamaha YHT-296 Manual download pdf (Page 52)

En 52

SETUP

Setting sound field program parameters

■

Parameters usable in certain sound field

programs

2ch Stereo only

Automatically bypasses the DSP circuit and tone control circuit

depending on the condition of tone control etc., when an analog

sound source is played back. You can enjoy a higher quality sound.

5ch Stereo only

Adjusts the center channel volume. J1

Adjusts the volume of the surround L channel. J1

Adjusts the volume of the surround R channel. J1

Straight Enhancer/5ch Enhancer only

Adjusts the effect level of the compressed music enhancer mode.

■

Parameters usable in surround decoder

q PLII Music only

Adjusts the soundscape of the front sound field. Sends front left/

right channels sounds to the surround speakers as well as the front

speakers for a wraparound effect.

Spreads the center channel sound to the front left and right

speakers to suit your needs or preferences. Set this parameter to 0

for outputting the center sound from the center speaker only, or to 7

for outputting it from the front left/right speaker only.

Adjusts the difference in level between the front sound field and

the surround sound field. You can adjust the difference in level

created by the software being played back to obtain the preferred

sound balance.

The surround sound gets stronger as you make the value more

negative, and the front sound gets stronger as you make the value

more positive.

When Neo:6 Music is selected

Adjusts the front left and right channel output relative to the center

channel to make the center channel more or less dominant as

necessary.

Direct

Auto (Default) Outputs sound by bypassing the DSP circuit and tone

control circuit when both tone controls of “Bass” and

“Treble” are set to 0dB.

Off Does not bypass the DSP circuit and tone control

circuit.

CT Level

Adjustable range 0 to 100%

Default setting 100%

SL Level

Adjustable range 0 to 100%

Default setting 100%

SR Level

Adjustable range 0 to 100%

Default setting 100%

EFCT LVL

High (Default) Standard effect.

Low Sets when the high-frequency signals of the source are

emphasized excessively.

Panorama

Off (Default) Disables the effect.

On Enables the effect.

CT Width

Adjustable range 0 to 7

Default setting 3

Dimension

Adjustable range -3 to +3

Default setting 0

C.Image

Adjustable range 0.0 to 1.0

Default setting 0.3

1 : Not displayed when speakers are set to be inactive.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 71 72

Comments to this Manuals

No comments

Yamaha YHT-296 Manual Page 52

Comments to this Manuals

Related products and manuals for AV receivers Yamaha YHT-296