Yamaha RX-V863 Manual download pdf (Page 103)

99 En

Customizing this unit (MANUAL SETUP)

ADVANCED

OPERATION

English

• This unit does not convert 480 line video signals and 576 line

video signals interchangeably.

• The analog component video signals with 480i (NTSC)/576i

(PAL) of resolution are converted into the S-video or composite

video signals and output at the S VIDEO MONITOR OUT and

VIDEO MONITOR OUT jacks.

• The converted video signals are only output at the MONITOR

OUT jacks. When recording a video source, you must make the

same type of video connections between each component.

• When composite video or S-video signals from a VCR are

converted into component video signals, the picture quality may

suffer depending on your VCR.

• Unconventional signals input at the composite video or S-video

jacks cannot be converted or may be output abnormally. In such

cases, set “VIDEO CONV.” to “OFF”.

HDMI resolution HDMI RES.

Use this feature to activate or deactivate the HDMI up-

scaling of the analog video signals input at the VIDEO, S

VIDEO and COMPONENT VIDEO jacks so that the up-

scaled video signals are output at the HDMI OUT jack.

This unit up-scales the video signals as follows:

• 480i (NTSC)/576i (PAL) → 480p/576p, 1080i, 720p,

or 1080p

• 480p/576p → 1080i, 720p, or 1080p

• This unit does not up-scale the analog component video signals

with 720p or 1080i of resolution.

• The “HDMI RES.” parameter appears only when you set

“VIDEO CONV.” to “ON”.

• If you connect your video monitor via HDMI connection, this

unit automatically detects the available video signal resolution

of the video monitor, and an asterisk (*) appears on the left of

the available video signal resolution(s).

• If this unit cannot detect the available video signal resolution(s)

of the connected video monitor, set “MON. CHK” (see

page 112) to “SKIP” and then set “HDMI RES.” again.

• This unit does not convert between 480 line video signals and

576 line video signals.

HDMI aspect ratio HDMI ASPECT

Use this feature to select the adjustment of aspect ratio for

analog video signals output at the HDMI OUT jack.

• When “HDMI RES.” is set to “THROUGH”, you cannot make

any adjustments to “HDMI ASPECT”.

• If the aspect ratio of the input video source is other than 4:3, this

unit automatically ignores the setting of “HDMI ASPECT”.

• When “HDMI ASPECT” is set to “SMART”, the video images

of the edge of the video monitor are rather stretched.

• When the video signals are input at HDMI IN jacks or the

signals are input with 720p, 1080i or 1080p of resolution, the

setting of “HDMI ASPECT” does not affect the video signals

output at the HDMI OUT jack.

Notes

Choice Functions

THROUGH

Does not up-scale any analog video signals.

480p (or 576p),

1080i, 720p,

1080p

Up-scales analog video signals to 480p or 576p,

1080i, 720p, or 1080p of resolution.

Notes

[p]/[[]:

[ENTER]:

B)VIDEO SET

HDMI RESOLUTION

>*THROUGH * 480p

* 720p *1080i

*1080p

Select

Enter

Choice Functions

THRGH

Does not make any adjustments to the aspect

ratio for the HDMI video signal sources.

16:9

Displays video images with the aspect ratio of

4:3 on your video monitor with the aspect ratio

of 16:9. Black stripes appear on the right and left

sides as a result.

SMART

Fits video images with the aspect ratio of 4:3 to

your video monitor with the aspect ratio of 16:9.

Notes

[p]/[[]:

[ENTER]:

B)VIDEO SET

VIDEO CONV.;;;;;;ON

HDMI RES.;;;;*1080p

HDMI ASPECT;;;THRGH

Up/Down

Select

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 151 152

Comments to this Manuals

No comments

Yamaha RX-V863 Manual Page 103

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V863