Yamaha RX-V620RDS Owner's Manual Page 46

  • Download
  • Add to my manuals
  • Print
  • Page
    / 82
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 45
44
SET MENU
6 DOLBY D. SET (Dolby Digital
set)
This setting is effective only when this unit decodes
Dolby Digital signals.
LFE LEVEL
Use this feature to adjust the output level of the LFE
(low-frequency effect) channel when playing back a
Dolby Digital signal. The LFE signal carries the low-
frequency special effect sound which is only added to
certain scenes.
Control value (dB): 20 to 0
Initial setting: 0 dB
Notes
Adjust the LFE level according to the capacity of your
subwoofer.
Normally, around 6 dB to 8 dB is most suitable for listening
at home.
D-RANGE (dynamic range)
Use this feature to adjust the dynamic range (the
difference between the maximum level and the minimum
level of sounds).
Choices: MAX, STD (standard), MIN
Initial setting: MAX
Select MAX for feature films.
Select STD for general use.
Select MIN for listening to sources at an extremely
low volume level.
L-LEVEL BST
H-LEVEL CUT
0.0
0.0
1.0
1.0
MAX
Dialog
level
Input level
Output level
STD
Dialog
level
Input level
Output level
MIN
Dialog
level
Input level
Output level
Note
When you select MIN, the sound output may be faint because
some Dolby Digital signals are not compatible with the
minimum-level dynamic range. In this case, select MAX or
STD.
7 DTS SET (DTS LFE level)
This setting is effective only when this unit decodes DTS
signals.
Use this feature to adjust the output level of the LFE
(low-frequency effect) channel when playing back a DTS
signal. The LFE signal carries the low-frequency special
effect sound which is only added to certain scenes.
Control range (dB): 10 to +10
Initial setting: 0 dB
Note
Adjust the LFE level according to the capacity of your
subwoofer.
7 DTS SET
LFE LEVEL 0dB
: Exit/
/+ : Adjust
6 DOLBY D. SET
: Select/
/+ : Adjust
LFE LEVEL
0dB
D-RANGE
MAX
STD
MIN
0108V620RDS_39-47_EN 1/18/1, 7:26 PM44
Page view 45
1 ... 45 46 47 ... 82

Comments to this Manuals

No comments