Yamaha RX-V365 Owner's Manual download pdf (Page 33)

31 En

Set menu

English

INTRODUCTION

ADDITIONAL

INFORMATION APPENDIX

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

Use the remote control to access and adjust each

parameter.

• You can change the set menu parameters while this unit is reproducing

sound.

1 Press hAMP and then press kMENU on

the remote control.

“AUTO SETUP” appears on the front panel display.

2 Press lk / n to select “MANUAL SETUP.”

3 Press lENTER to enter “MANUAL SETUP.”

“1 SOUND MENU” appears on the front panel

display.

4 Press lk / n repeatedly and then press

lENTER to select and enter the desired

menu.

The following menus appear on the front panel

display as you press lk / n repeatedly.

5 Press lk / n repeatedly and then press

lENTER to select and enter the desired

submenu.

• Repeat this step to navigate to and enter the items

you want to adjust.

• To return to the previous menu level, press

nRETURN.

6 Press lk / n to select the desired parameter

and then ll / h to change the parameter

value.

• Press lh to increase the value.

• Press ll to decrease the value.

7 Press kMENU to exit from set menu.

Use this menu to manually adjust any speaker settings or

compensate for video signal processing delays when using

LCD monitors or projectors.

• Initial settings are indicated by (*) in this following each parameter.

Use this feature to manually adjust any speaker settings.

■ FRONT B speaker setting FRONT B

Use this feature to select the location of the front speakers

connected to the FRONT B terminals.

Notes

• If you connect headphones to the PHONES jack on this unit, the sound is

output from both headphones and the FRONT B terminals while

“FRONT B” is set to “ZONE B.”

• If a DSP program is selected when “FRONT B” is set to “ZONE B,” this

unit automatically enters the Virtual CINEMA DSP mode (see page 27).

■ Front speakers, Center speaker, Surround

left/right speakers

FRONT, CENTER, SUR. LR

Select “LARGE (LRG)” or “SMALL (SML)” depending

on the size of your each speaker. When Center speaker or

Surround speakers is not connected, select “NONE.”

Initial setting:

FRONT: “LARGE”

CENTER: “SML”

SUR. LR: “SML”

Notes

• When “BASS OUT” is set to “FRONT” on this page, you can select only

“LARGE” in “FRONT.” If “FRONT” is set to a setting other than

“LARGE” in advance, this unit automatically changes the value to

“LARGE.”

• When you select “NONE” in “CENTER,” the center channel signals are

directed to the front left and right speakers.

• When you select “NONE” in “SUR. LR,” this unit is automatically enters

the Virtual CINEMA DSP mode (see page 27).

■ LFE/Bass out BASS OUT

Use this feature to select the speakers that output the LFE

(low-frequency effect) and the low-frequency signals.

• If you are not satisfied with the bass sounds from your speakers, you can

change these settings according to your preference.

Using set menu

MANUAL SETUP

1 SOUND MENU

2 INPUT MENU

3 OPTION MENU

1 SOUND MENU

Speaker settings A)SPEAKER SET

Choice Condition

FRONT* When FRONT B speakers are set in the main zone.

ZONE B When FRONT B speakers are set in another zone. This

setting mutes all the speakers in the main room when

FRONT B is selected by CSPEAKERS.

Woofer diameter of a speaker is 16 cm (6.5 in) or

larger: LARGE (LRG)

Woofer diameter of a speaker is smaller than 16 cm

(6.5 in): SMALL (SML)

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 103 104

Comments to this Manuals

No comments

Yamaha RX-V365 Owner's Manual Page 33

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V365