Yamaha RX-V1800 Manual download pdf (Page 88)

86 En

Customizing this unit (MANUAL SETUP)

Input/output assignment

I/O ASSIGNMENT

Use this feature to assign the input/output jacks according

to the component to be used if the initial settings of this

unit do not correspond to your needs. Change the

parameter to reassign the respective jacks and effectively

connect more components.

Once the input/output jacks are reassigned, you can select

the corresponding component by using the

INPUT

selector on the front panel (or the input selector buttons on

the remote control).

• “NONE” appears in the OSD when any input source is not

assigned to the input/output jack.

• You cannot select a specific item more than once for the same

type of jack.

• An asterisk (*) appears to the right of the input/output jack

names that have been changed from their previous settings.

• The currently assigned input source for the selected input/

output jack appears in the OSD (“Current ( DTV/CBL )” in the

display example above).

Input rename INPUT RENAME

Use this feature to change the name of the input source

that appears in the OSD and in the front panel display.

You can also change the name of the input source that appears in

the display window (A) on the remote control. Refer to

“Changing source names in the display window” on page 102.

1 Press 3l / h to place the “_” (underscore)

under the space or the character you want to

edit.

2 Press 3k / n to select the character you

want to use and then press 3l / h to move

to the next space.

• You can use up to 9 characters for each input.

• Press

n to change the character in the following order,

or press

k to go in the reverse order:

A to Z, 0 to 9, a to z, symbols (#, *, –, +, etc.), space.

3 Repeat steps 1 through 2 to rename each

input source.

4 Press

ENTER to complete.

Volume trim VOL. TRIM

Use this feature to adjust the level of the signal input at

each jack. This feature is useful if you want to balance the

level of each input source to avoid sudden changes in

volume when switching between input sources.

Control range: –6.0 dB to +6.0 dB

Control step: 0.5 dB

Initial setting: 0.0 dB

This parameter also affects the signals output at the audio ZONE

OUT jacks.

Decoder mode DECODER MODE

Use this feature to switch the decoder mode. You can

designate the reassigned digital input jacks for DTS

signals.

[p]/[[]:

[ENTER]:

J) DVR

COMPONENT IN;;;[C]

COAXIAL IN;;;;;(3)

OPTICAL IN;;;;NONE

OPTICAL OUT;;;NONE

HDMI IN;;;;;;;;[4]

Current ( DTV/CBL )

Select

Enter

[p]/[[]:

[ ]/[ ]:

[ENTER]:

[RETURN]:

[

A) TUNER

INPUT RENAME

TUNER . TUNER

Position

Character

Enter

Return

Notes

Choice Functions

AUTO

Automatically detects digital audio signal input

types and selects the appropriate decoder.

DTS

Activates the DTS decoder when digital audio

signals are input.

[]/[]:

[p]/[[]:

[

A) TUNER

INPUT RENAME

VOL. TRIM;;;;+6.0dB

UP/DOWN

Adjust

[]/[]:

[p]/[[]:

[

D) CD

I/O ASSIGNMENT

INPUT RENAME

VOL. TRIM;;;;;0.0dB

DECODER MODE;;;AUTO

UP/DOWN

Select

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 423 424

Comments to this Manuals

No comments

Yamaha RX-V1800 Manual Page 88

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V1800